Handy Performance Features
46 MM6 Owner’s Manual
■Setting the Number of Beats per
Measure, and the Length of Each
Beat ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
In this example we’ll set up a 3/8 time signature.
1Press and hold the [METRONOME] but-
ton for longer than a second.
The metronome time signature and length of
each beat will be shown on the display.
2Use the dial to select the number of
beats per measure.
A chime will sound on the first beat of each
measure while the other beats will click. All
beats will simply click with no chime at the
beginning of each measure if you set this
parameter to “00”.
The available range is from 0 through 60.
Select 3 for this example.
3Press the category [INC] button once to
display “Time Signature – Denominator”.
4Use the dial to select a beat length.
Select the required length for each beat: 2,4,8
or 16 (half note, quarter note, eight note, or
16th note). For this example, select 8. The time
signature should now be set to 3/8.
Press the [METRONOME] button to confirm
the settings.
■Adjusting the Metronome Volume
1Press the [UTILITY] button to go to the
UTILITY display.
2Press the [DEC] / [INC] category button
until the “Metronome Volume” item
appears on the display.
3Use the dial to set the metronome vol-
ume as required.
Hold for Longer
than a Second
Note Value
(or length of
one beat)
Number of
Beats per
Measure
•The metronome time signature will synchronize to a pattern or song
that is playing, so these parameters cannot be changed while a pat-
tern or song is playing.
NOTE
Metronome volume.