Connections
78 MM6 Owner’s Manual
By connecting the instrument to a computer, the instrument’s performance data can be used on the com-
puter, and performance data from the computer can be played on the instrument.
Transferring Performance Data Between the Instrument and a Computer

MIDI settings ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

These settings pertain to performance data transmission and reception.
1Press the [UTILITY] button to go to the
UTILITY display.
2Use the CATEGORY [DEC] and [INC]
buttons to select the item you want to
set.
3Use the dial to select ON or OFF.
Transferring Performance Data to and from a Computer
Item Range/Settings Description
Local ON/OFF Local control determines whether or not notes played on the instrument are sounded by
its internal tone generator system: the internal tone generator is active when local control
is on, and inactive when local control is off.
External Clock ON/OFF This setting determines whether the instrument is synchronized to its own internal clock
(OFF), or to a clock signal from an external device (ON).
Keyboard Out ON/OFF This setting determines whether keyboard performance is transmitted via the MIDI output
(ON) or not (OFF).
Pattern Out ON/OFF This setting determines whether keyboard performance data is transmitted via the MIDI
output (ON) or not (OFF).
Song Out ON/OFF This setting determines whether keyboard song data is transmitted via the MIDI output
(ON) or not (OFF).
USB Cable
USB TO HOST TerminalUSB Terminal
MM6
Computer
• If you can’t get any sound out of the instrument, the Local setting
may be the most likely cause.
CAUTION
• If External Clock is ON and no clock signal is being received from
an external device, the song, pattern, and metronome functions
will not start.
CAUTION