Pattern Functions
52 MM6 Owner’s Manual
5Press a main section button: [A]–[D].
The indicator to the upper left of the active
main section button will light.
6The main section of the selected pat-
tern will start as soon as you play a
chord with your left hand.
For this example, play a C major chord (as
shown below).
For information on how to enter chords, see
“Playing Auto-accompaniment Chords” on
page 25.
7Press any of the main section buttons,
[A]–[D], as required.
A fill-in will play, leading smoothly to the
selected main section.
The initial default split point is key number 54 (the F#2 key), but you can change it to another key using the
procedure described below.
1Press the [UTILITY] button to go to the
UTILITY display.
2Use the CATEGORY [DEC] / [INC] but-
tons to select the Split Point item.
3Use the dial to set the split point to any
key from 000 (C-2) through 127 (G8).
Accompaniment
Range
Split Point
Setting the Split Point
Split point (54 : F#2)
Main Voice
Split Voice
• When you change the split point the auto-accompaniment split point
also changes.
• The split voice sounds when the split-point key is played.
NOTE