Connections
MM6 Owner’s Manual 75
By connecting a USB storage device to the instrument you can save data you’ve created, as well as load or
play the data from the connected device.

Compatible USB Storage

devices ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
A USB storage device such as a hard disk drive,
floppy disk drive, or flash memory can be con-
nected to the USB TO DEVICE terminal. Other
types of USB device such as computer keyboards
or mice cannot be used.
Before purchasing USB storage devices please
consult your Yamaha dealer or an authorized
Yamaha distributor (see list at end of the Owner’s
Manual) for advice.

Connection to a USB Storage

Device ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Connecting a USB Storage Device
•Avoid frequently turning the power to USB storage devices on or
off, or connecting/disconnecting the cable. Doing so may result in
the instrument “freezing” or hanging up. While the instrument is
accessing data (such as during the Save, Load and Delete opera-
tions), do not unplug the USB cable, do not remove the media from
the device, and do not turn the power off to either or both devices.
CAUTION
• Some USB memory devices may require more current than the
instrument can supply, causing the instrument’s over-current pro-
tection function to be activated and making it impossible to use
the device. If this occurs “OverCurrent” will appear in the upper-
right area of the MAIN display. To restore normal operation remove
the USB device from the USB TO DEVICE connector and turn the
instrument’s power off and then back on again.
CAUTION