Storing/Saving Data
MM6 Owner’s Manual 67
1Connect a USB storage device to the
USB TO DEVICE terminal, being careful
to insert it in the proper direction.
2Check that “CONNECT” is showing in
the MAIN display.
You can go to the FILE CONTROL display
from which you can access USB storage device
operations by pressing the [MENU] button
from this display.
(Do not press this button now, but only when
instructed to in the section below.)
Using a USB Storage Device
• In order to play songs copied to a USB storage device from a
computer or other device, the songs must be stored either in
the USB storage device’s root directory or a first-level/second-
level folder in the root directory. Songs stored in these location
can be selected and played as USB songs (page 26). Songs
stored in third-level-folders created inside a second-level folder
cannot be selected and played by this instrument.
USB Storage Device (Root)
Can Be
Selected/
Played.
Cannot Be
Selected/
Played.
Song
File
Song
File
Song
File
Song
Folder
Song
Folder
Song
Folder
root
IMPORTANT
Menu Page
Format 68
User File Save 69
SMF Save 70
Load 71
Delete 72
A message (information or confirmation
dialog) will sometimes appears on the dis-
play to facilitate operation. Refer to the
“Messages” section on page 83 for expla-
nations of each message.
CONNECT
• No sound will be produced if you play the keyboard while FILE
CONTROL display is showing. Also, in this state only buttons related
to file functions will be active.
NOTE
• The FILE CONTROL display will not appear in any of the following
cases:
• During pattern or song playback
• While data is being loaded from a USB storage device
NOTE