Yamaha P-200 SPLIT POINT=C 2 KBD AREA=Sub/Man, 9 VOICE Bass / Piano1

33
If you enter Split mode directly from
Dual mode, and then choose the
Organ 1 voice as the main voice, when
you press the [SPLIT] button to exit
Split mode, the P-200 will
automatically switch to Single mode.
In Split mode, the [PITCH] and
[MODULATION] wheels, as well as the
sustain, soft and sostenuto pedals, will
only affect the main voice.
NOTE
NOTE
ENTERING AND EXITING SPLIT MODE
Press the [SPLIT] button.
When you press the [SPLIT] button, the LED above it will light, and the keyboard will
split into two areas, one playing the main voice you selected in Single or Dual mode,
and the other playing the voice which was last selected as the Split mode sub voice.
(UPRIGHT BASS is the default sub voice designated at the factory.)
The current split point designation and keyboard area assignments briefly
appear in the screen.
The first line of the above screen indicates that the current split point area is
designated at key C2 (the initial default setting). The second line indicates that
the sub voice is assigned to the left side of the split point, while the main voice
is assigned to the right side of the split point.
After a few moments, the names of two voices will appear in the LCD screen.
The P-200 will now play the two voices using the current split point designation
and keyboard area assignments.
To exit Split mode, simply press the [SPLIT] button again. The P-200 will return
to Single or Dual mode, depending on which one was active before you
entered Split mode, playing the voice you have selected as the main voice.
SPLIT POINT=C 2 
KBD AREA=Sub/Man

Left side Right side
Current split point
 9Ô VOICE Ò
Bass / Piano1

Sub Voice Main Voice
BALANCE
SPLIT
Split Point (included in main area)
Sub Voice (C2) Main Voice