28
A different modulation type and speed
can be selected for each voice. When
you play two voices in either Dual or
Split mode, the P-200 will apply the
main voice modulation type and speed
setting to both voices, and ignore any
settings which you may have made for
the sub voice. For more information
about main and sub voices, see page
29.
Note that each time you select a modulation type, a message will briefly display
in the LCD screen, as follows.
This temporary message displays the current speed level for the modulation
type that you just selected, between 0 and 7. You can easily change the speed
level for the currently selected modulation type.
CHANGING MODULATION SPEED
1. Hold the [MODULATION] button and move the [DATA ENTRY] slider (or
press [–1/NO] or [+1/YES]).
As soon as you move the [DATA ENTRY] slider (or press [–1/NO] or [+1/YES])
the MODULATION SPEED screen appears.
If you move the [DATA ENTRY] slider upward, the speed level increases; if you
move the [DATA ENTRY] slider downward, the speed level decreases. A value
of 7 will produce the largest number of modulations, whereas a value of 0 will
effectively turn the modulation off.
2.Release the [MODULATION] button.
After a moment, the voice name will reappear in the screen.
Try different settings and play the keyboard and notice the difference between
high and low modulation speed level settings.
CS
DATA ENTRY
REVERB MODULATION
ROOM
STAGE
HALL
CHORUS
SYMPHONIC
TREMOLO
EFFECT
+1/YES-1/NO
PS2PS1
+or
MOD SPEED $
3à
NOTE