Yamaha P-200 1. , 2.

CHANGING REVERB DEPTH

1. Hold the [REVERB] button and move the [DATA ENTRY] slider (or press

[–1/NO] or [+1/YES]).

As soon as you move the [DATA ENTRY] slider (or press [–1/NO] or [+1/YES])

the REVERB DEPTH screen appears.

If you move the [DATA ENTRY] slider upward, the depth level increases; if you

move the [DATA ENTRY] slider downward, the depth level decreases.

A value of 7 will produce the largest number of reverberations, whereas a value

of 0 will effectively turn the reverb off.

2.Release the [REVERB] button.

After a moment, the voice name will reappear in the screen.

Try different settings and play the keyboard and notice the difference between

high and low reverb depth level settings, and the P-200’s wide variety of reverb

options.

DATA ENTRY

REVERB MODULATION

ROOM

STAGE

HALL

CHORUS

SYMPHONIC

TREMOLO

EFFECT

+1/YES-1/NO

PS2PS1

+or

■Modulation Effects

The P-200’s internal DSP digital signal processor generates three types of

modulation effects which you can apply to the voices. (Note: These modulation

effects are unrelated to the vibrato effect which you can apply to voices using the

[MODULATION] wheel. For details about the vibrato effect, see page 59.)

These include CHORUS, a modulated delay which effectively makes a voice sound

like more than one instrument is being played, SYMPHONIC, a more pronounced

chorus effect, and TREMOLO, a rotating speaker effect.

As you select each voice you will notice that most have a specific modulation effect

already assigned to them, indicated by a lit LED to the left of the name of the

selected modulation effect type. These are the initial default assignments set at the

factory, but you can select any modulation effect you wish for each voice, or even

turn the modulation effect off. You can also change modulation speed on the spot.

SELECTING A MODULATION TYPE

Press the [MODULATION] button once or more.

When you press the [MODULATION] button repeatedly, the modulation types will be

selected in order as follows: CHORUS, SYMPHONIC, TREMOLO, then OFF. (No lit

LED represents Off status.)

REVERB MODULATION

ROOM

STAGE

HALL

CHORUS

SYMPHONIC

TREMOLO

EFFECT

In Voice Play mode, a different reverb

type and depth can be selected for

each voice. When you play two voices

in either Dual or Split mode, the P-200

will apply the main voice reverb type

and depth setting to both voices, and

ignore any settings which you may

have made for the sub voice. For more

information about main and sub

voices, see page 29.

NOTE

You can also select the modulation

type and speed settings in Edit mode

(see page 59).