31
NOTE

ADJUSTING THE BALANCE OF THE DUAL VOICES

1. Hold the [BALANCE] button and move the [DATA ENTRY] slider.
As you move the [DATA ENTRY] slider, the DUAL BALANCE screen appears.
Moving the slider upwards increases the level of the main voice while
decreasing the level of the sub voice. Conversely, moving the slider
downwards increases the level of the sub voice while decreasing the level of
the main voice. You can set the balance to any value between -16 and 15.
Two indicators to the right of the numeric value display the relative balance of
sub and main voices.

DUAL BALANCE $

0J

Sub Main
CS
DATA ENTRY
BALANCE
SPLIT +
You’ll find it convenient to set the desired balance by holding the [BALANCE]
button and moving the [DATA ENTRY] slider with one hand, and then playing
the keyboard with the other hand.
2.Release the [BALANCE] button.
After a moment, the Dual voice names will reappear in the screen.
If you choose different Dual voices, the balance relationship will remain the
same as determined above, until you change the balance setting again.

DETUNING THE DUAL VOICES

1. Hold the [DETUNE] button and move the [DATA ENTRY] slider.
As you hold the [DETUNE] button, do not press a key on the keyboard until
you move the [DATA ENTRY] slider. (Note: If you press a key on the keyboard
before moving the [DATA ENTRY] slider, you will change the Transpose setting.
For information about the Transpose feature, see page 37.)
DETUNE
TRANSPOSE
CS
DATA ENTRY
+
In this case you cannot use the
[–1/NO] and [+1/YES] buttons to
change data.