58
The right-most parameter, Attack mode, determines which notes
in a held cluster of notes are given an attack sound. With the ì
(first) setting, only the first note played will have an attack; all other
notes played while the first note is held will have no attack. With
the í(Each) setting, all notes played will have an attack sound.
Pitch Bend (PB)/ModulationWheel (MW)
This function lets you set the maximum range that the pitch will
bend when you use the [PITCH] wheel, as well as determine
the type of effect assigned to the [MODULATION] wheel.
PITCH BEND RANGE (0 ~ 12)
You can set the pitch to bend up or down for each voice within
one octave, where 0 represents no pitch bend, and 12 represents
one octave. (The default for each voice is set to 2.) Each unit is
one semitone.
Moving the [PITCH] wheel to its extreme position while playing the lowest or
highest note on the keyboard may exceed the P-200’s legal range (A-1 ~
C7). In such a case, the P-200 will play and repeat the one octave higher or
lower range. (This also occurs if the Transpose setting causes the pitch
bend to exceed the legal range.)
MODULATION WHEEL ASSIGN (Off, Reverb
Depth, Modulation Speed, Vibrato)
You can assign one of three effects for each voice to the
[MODULATION] wheel, or turn the effect off.
The vibrato effect is internally set and cannot be modified. Note that trying
to apply the vibrato effect to the Piano 1 ~ 4 voices will have no effect.
Keyboard Sensitivity
The Keyboard Sensitivity function lets you control how the
volume of the internal voices and connected MIDI instruments
respond to your playing.
The P-200 lets you designate independent Keyboard
Sensitivity settings for the internal tone generator (each voice)
and external MIDI devices, as well as the minimum and
maximum range of the keyboard volume.
KEYBOARD SENSITIVITY INTERNAL (Normal,
Soft-1~3, Hard-1~3, Fixed-1~3)
This setting determines how the P-200’s keyboard affects the
internal voices. There are ten different types of sensitivity settings.
(For details, see Velocity Curves, below.)
KEYBOARD SENSITIVITY MIDI (Normal, Soft-1~3,
Hard-1~3, Fixed-1~3)
This setting determines how the P-200’s keyboard affects external
MIDI devices, such as a tone generator. There are ten different
types of sensitivity settings. (For details, see Velocity Curves, next
page.)
KEYBOARD RANGE (Minimum, Maximum)
The values set here determine the minimum and maximum volume
range of the keyboard, between 1 and 128. (You cannot set the
minimum number to exceed the maximum number.)
When both minimum and maximum are set to 1, no sound will be
produced.

MW ASSIGN &

vibrato

PB RANGE %

2

KBD SENS.INT. %

normalb

KBD SENS.MIDI &

normalb

KBD RANGE MIN '

1#128

NOTE
NOTE
NOTE

COMBI. FIRST '

ATK5 3955 í

Attack Mode