OPERATING INSTRUCTIONS (continued)
OTHER FUNCTIONS
A2 / NICAM / Sound Multiplex
•The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears in yellow as shown on right.
Press the CH I / II button to select the sound to be heard.
Each time the button is pressed, I, II or ▼ (force mono) appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received | Yellow |
| Yellow |
[I] | [II] |
ENGLISH
8
NICAM [II]
Green
NICAM signal received Yellow | Yellow | Green |
NICAM [I] | NICAM [II] |
|
Select I, II or 
(force mono) to hear the CH I, CH II or MONO broadcast respectively.
STEREO sound broadcast
When a stereo program is received, the sound mode display will appear in red, and you can press the CH I / II button to select either stereo or mono sound.
Each time the button is pressed, 
or ▼ (force mono)appear cyclically on the screen.
When receiving NICAM signals, the NICAM display will appear as below.
Sound multiplex signal received
Red | Green |
NICAM signal received
NICAM | Red | Green |
Select 
or 
(force mono) to hear the STEREO or MONO broadcast respectively.
Monaural sound broadcast
When a monaural program is received, the sound mode display will appear in green.
You can press the CH I / II button to swith the sound mode between monaural and forced mono (sounds are identical).
Each time the button is pressed, 
or ▼ (force mono) appear cyclically on the screen.
8
8
NOTE
•If the sound signal is not strong enough for quality reception, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
•If the sound signal has hiss noise or the plasma monitor keeps switching between stereo and mono mode due to signal condition, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
53
