Yamaha PDM-4210E OPERATING INSTRUCTIONS continued SETUP MENU continued, English, Audio Input

OPERATING INSTRUCTIONS (continued)

SETUP MENU (continued)

Selected characters		▼							▼		Setup hint
Audio Input
AV1				Stereo			L/Mono				This should correspond to the audio signal from the equipment that is
											connected to the AV1 audio input terminal. If the signal is monaural audio,
											set this to L/Mono.
AV2
AV3											(Same to AV1)
AV4
Scart Output										Not Available (grayed out)
RGB1			DVI-PC				DVI-STB				This should correspond to the signal mode of the signal from the
											equipment that is connected to the RGB1 DVI terminal.
RGB2 (1st step)			RGB			Component					This should correspond to the signal mode of the signal from the
											equipment that is connected to the RGB2 D-sub terminal.
											This step should be set only when [Component] is selected on the 1st
											step.
											This should correspond to the signal mode of the signal from the
RGB2 (2nd step)	Auto				HDTV			SDTV/DVD			equipment that is connected to the RGB2 D-sub terminal.
											• Normally, set this to Auto. The signal mode of the input signal will be
											automatically recognized.
											• If the input signal contains a lot of noise or has a low level at Auto and the
											operation is found erratic, set this to match the input signal.

OTHER FEATURES

Automatic Store

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.

ENGLISH

Menu	Display	Registration condition
Picture	Picture Mode	1 setting is registered.
	Contrast	For every input function and every
		Picture Mode, 1 setting is
	Brightness
		registered.
	Colour
	Sharpness
	Hue
	Colour Temperature
	Contrast Mode
	YNR
	CNR
	Film Mode
	PAL Comb Filter
	LTI
	CTI
	Black Enhancement
	Auto Colour
	Colour Temp. Adjust
	R Amplitude	For every Colour Temperature, 1
		setting is registered.
	G Amplitude
	B Amplitude
	R Cut Off
	G Cut Off
	B Cut Off
		For every input function and every
	Colour Management	Picture Mode, 1 setting is
		registered.
	Magenta	1 setting is registered.
	Red

Menu	Display	Registration condition
Picture	Yellow	1 setting is registered.
	Green
	Cyan
	Blue
	Colour Decoding	-
	Red	For every Colour Temperature, 1
		setting is registered.
	Green
	Colour	For every input function and every
		Picture Mode, 1 setting is
	Hue
		registered.
Function	Video Power Save	1 setting is registered.
	Default Zoom
Setup	System	1 setting is registered.
	Colour System	1 setting is registered.
	AV1
	AV2
	AV3
	AV4
	Video Input	-
	AV1	1 setting is registered.
	AV2
	AV4
	Audio Input	-
	AV1	1 setting is registered.
	AV2
	AV3
	AV4
	RGB1
	RGB2

•The previously recorded items will be lost.

39