Recording Your Own Performance

2 Press the [EXIT] button, then select the recording part for each track (Part Assign).

◆Selecting the part for the Melody track

When Style is OFF: You can select the track for recording from [1]– [16].

When changing the track function between [TR 1–8] and [TR 9–16], press the [REGIST/PART [MIXER]] button repeatedly until the desired item appears at the top on the display.

While holding down the [REC] button, press one of the track buttons [1/9]–[8/16] until the desired part is shown at the track button. Each time you press the button, the part is changed in order (e.g., MAIN, DUAL, LEFT) in the Main display.

When Style is ON: [TR 1–8] can only be selected for the Melody tracks.

CAUTION

•If you record your perfor- mance to a track that con- tains previous data, the previous data will be overwrit- ten by the new data.

NOTE

•When ACMP track is set to REC ON, the accompaniment will be automatically set to ON.

•ACMP ON/OFF does not change while recording is in progress.

•An assigned part cannot be specified to another track.

•A maximum of three melody tracks can be recorded simulta- neously.

Press and hold

Track 1 is set to the MAIN part.

◆Selecting the part for the Accompaniment track

While holding down the [REC] button, press the [ACMP] button. The REC indication will be highlighted in the display and operation will be set to record ready mode.

Press and hold

ACMP is set to record ready mode.

NOTE

•If you want to cancel the record ready mode of a track, simulta- neously hold down the [REC] button and press again the track button you want to cancel.

PSR-S550 Owner’s Manual 35