Creating Original Styles (Style Creator)
■Editing (Quantize and part clear) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Quantize
This function allows you to automatically align the timing of all recorded notes.
|
|
| 1 measure |
| |
Actual recorded |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
note |
| 1/4 | 1/2 | 3/4 | |
When Quantize |
|
|
|
|
|
|
|
|
|
| |
is set to 1/8 | 1/8 | 1/4 |
|
|
|
|
|
|
| ||
When Quantize |
|
|
|
|
|
|
|
|
|
| |
is set to 1/4 |
| 1/4 | 1/2 |
| |
1 Press the CATEGORY[<]/[>] button repeatedly until “Quantize” appears in the display.
2 Rotate the dial and select the value.
Settings: 1/4, 1/6, 1/8, 1/12, 1/16, 1/24, 1/32
3 Press the [EXECUTE] button.
The “UNDO” message appears.
4 Press the [EXECUTE] button again if you want to replace with the previous Quantize value.
NOTE
•If the recorded Part is not specified, Quantize cannot be set. Specify the Part for recording and then use the quantize function.
•The undo icon on the display will disappear if you exit from the cur- rent display.
Clearing a recorded Part
Select a desired section for clearing, and then follow the instructions below.
1 Press the CATEGORY[<]/[>] button repeatedly until “Part Clear” appears in the dis- play.
2 Press and hold a desired [PART] button for longer than a second.
NOTE
•You can also select a Part by rotating the dial. In this case, press the [EXECUTE] button to clear.
A confirmation message appears.
3 Press the [+/YES] button to clear the selected Part.
70