MIXER

3 Press the desired [TRACK] button you want to control.

The selected track will be changed to ON auto- matically.

4

5

Control the Parameter ON/OFF or other parameters in each track.

(Refer to the following instructions.)

Repeat steps 2–4 and set other tracks if neces- sary.

Press [EXIT] to exit from the mixer oper- ation.

Track ON/OFF and other parameter controls

■Track ON/OFF ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Determines whether each is track ON or OFF (unmuted or muted)

Select the track you want to set ON/OFF (refer to steps 1–3 of basic operation on page 75), and then follow the instructions below.

The selected track will be changed to ON automat- ically.

1 Press the [TRACK] button again to set it to OFF.

The button toggles between ON and OFF, and the [TRACK] button also changes between Green to unlit.

■Parameter controls ● ● ● ● ● ● ● ● ● ● ●

Enter the Mixer mode (refer to steps 1–3 of basic operation on page 75), and then set the Volume, Pan, Reverb Level and Chorus Level.

Volume

Determines the Part volume.

Range: 0–127

 

 

 

Pan

Determines the Pan position.

Range: 0–64–127

 

 

 

Reverb

Determines the Reverb depth.

Range: 0–127

Level

 

 

 

 

 

Chorus

Determines the Chorus depth.

Range: 0–127

Level

 

 

 

 

 

1 Press the CATEGORY [<]/[>] button to select the desired item.

2 Rotate the dial and set the parameter.

Current volume

Repeat steps 1–2 and set other tracks if neces- sary.

3 Press the [EXIT] button to exit from the mixer operation.

76 PSR-S550 Owner’s Manual