Using USB Flash Memory

Loading Registration Files, Style Files, Song Files or MDB Files

Registration files, Style files, Song files and MDB files residing on a USB flash memory can be loaded to the instrument.

You can also play the Song or Style file directly without loading (see page 89).

CAUTION

If the same file name already exists in the instrument’s internal memory, it will be overwritten.

1With the USB flash memory device con- taining the file you want to load con-

nected to the USB TO DEVICE connector, check that the “CONNECT” message is shown in the MAIN display.

2Press the [FILE MENU] button.

3Use the CATEGORY [<] and [>] buttons to locate the Load item.

4 Use the dial to select the Registration, Style, Song or MDB file you want to load.

All user files in the USB flash memory device will be displayed first, followed by the Registration files.

NOTE

The instrument will not recognize the style file if it is moved out of the USER FILES folder.

5 Press the [EXECUTE] button. The display prompts you for confirmation.

You can cancel the load operation at this point by pressing the [-/NO] button.

6 Press the [EXECUTE] button again, or the [+/YES] button, and the load operation will begin.

CAUTION

Once the load-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB flash memory during this operation.

7 A message appears in the display indicating that the operation is complete.

Press the [EXIT] button to return to the MAIN display.

PSR-S550 Owner’s Manual 87