Using a Microphone (PSR-S900)
Adjusting the Microphone and Harmony Sound
PSR-S900/S700 Owner’s Manual
188
3Press the TAB [
][
®
] buttons to select the OVERALL SETTING tab dis-
play.
4Use the [A]–[J] buttons to select the item (parameter) (see below) to
be adjusted.
5Use the [1
ππ
ππ
]–[8
ππ
ππ
] buttons to set the value.
6Press the [EXIT] button to exit from the MICROPHONE SETTING dis-
play.

Adjustable Items (Parameters) in the OVERALL SETTING Tab

Display

3BAND EQ
EQ (Equalizer) is a processor that divides the frequency spectrum into multiple
bands, which can be boosted or cut as required to tailor the overall frequency
response. The instrument features a high-grade three-band (LOW, MID and HIGH)
digital equalizer function for the microphone sound.
•Hz
Adjusts the center frequency of the corresponding band.
•dB
Boosts or cuts the level of the corresponding band by up to 12 dB.
NOISE GATE
This effect mutes the input signal when the input from the microphone falls below
a specified level. This effectively cuts off extraneous noise, allowing the desired sig-
nal (vocal, etc.) to pass.
SW (Switch)
This turns the Noise Gate on or off.
TH. (Threshold)
This adjusts the input level at which the gate begins to open.
5
44
6
3
CAUTION
Settings in the OVERALL SET-
TING tab display are automat-
ically saved to the instrument
when you exit from the dis-
play. However, if you turn the
power off without exiting
from this display, the settings
will be lost.