Using, Creating and Editing Voices
Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-S900/S700 Owner’s Manual
96
7Use the [5
ππ
ππ
]/[6
ππ
ππ
] buttons to select the effect CATEGORY.
8Use the [7
ππ
ππ
]/[8
ππ
ππ
] buttons to select the effect TYPE.
If you want to edit the effect parameters, go on to the next operation.
Editing and Saving the effect
9Press the [F] (PARAMETER) button to call up the display for editing
the effect parameters.
10 If you have selected one of the DSP 2-4 effect blocks in step 5:
You can edit its standard parameters as well as its variation parameter.
To select the standard type of parameters, press the [B] button. To select its
variation parameter, press the [E] button.
11 Select one of the parameters you want to edit by using the [4
ππ
ππ
]/
[5
ππ
ππ
] buttons.
Available parameters differ depending on the selected Effect type.
12 Adjust the value for the selected parameter by using the [6
ππ
ππ
]/
[7
ππ
ππ
] buttons.
If you have selected the REVERB, CHORUS or DSP1 effect block in step 5:
Adjust the Effect Return Level by pressing [8
π†
] button.
13 Press the [I] (SAVE) button to call up the display for saving your origi-
nal effect.
Re-selecting the Effect block,
category and type
Use the [1
π†
]–[3
π†
] but-
tons. The re-selected effect con-
figuration is displayed at the
upper left side box in the display.

13

10
10

11 12

Effect Return Level:
Determines the level or amount
of effect applied.
This is set for all parts or channels.