Using Your Instrument with
Other Devices
PSR-S900/S700 Owner’s Manual 195

Assigning Specific Functions to Each

Foot Pedal

The functions assigned by default to the connected foot-

switch or foot controller can be changed—for example,

letting you use the footswitch to start/stop Style play-

back, or use the foot controller to produce pitch bends.

1Call up the operation display.
[FUNCTION] → [D] CONTROLLER → TAB [
√
][
®
]
FOOT PEDAL
2Use the [A]/[B] buttons to select one of the two
foot pedals to which the function is to be
assigned.
3Use the [1
ππ
ππ††
††
] button to select the functions to
be assigned to the pedal specified in step 2.
Details on the pedal functions are listed below.
4Use the [2
ππ
ππ††
††
]–[8
ππ
ππ††
††
] buttons to set the
details of the selected functions.
The available parameters differ depending on the
function selected in step 3. Details on the parameters
are given on page 196.
5Check that the desired function is controllable
with the pedal by actually pressing the pedal.
nWhen you use the pedals to switch Registration Memory
settings (page 138), these settings are invalid.
Set the polarity of the pedal
Pedal on/off operation may differ depending on the partic-
ular pedal you’ve connected to the instrument. For exam-
ple, pressing down on one pedal may turn the selected
function on, while pressing a different make/brand of
pedal may turn the function off. If necessary, use this set-
ting to reverse the control. Press the [I] (PEDAL POLAR-
ITY) button to switch the polarity.
Using the Footswitch or Foot Controller ([AUX PEDAL] jack)