Yamaha PSR-S900 Playing Back the Recorded Performance

Quick Guide
PSR-S900/S700 Owner’s Manual 65
Playing Back the Recorded Performance
Play back the recorded performance.
[USB] → [E] USB AUDIO RECORDER
The file recorded is selected in step 1-7 (page 63). For information about the operation method to change the
name of the displayed file or to delete a file, see the section “File/Folder Operations in the File Selection Dis-
play” on page 72. However, the operation that copies/moves file/folder to the User tab cannot be done here.
The song is played back from the beginning, and the display indicates the auditioning process. This display
closes automatically when auditioning is stopped. Press the [G] (CANCEL) or [EXIT] button to stop audition-
ing.
CAUTION
Avoid frequently connecting/disconnecting the USB storage device, or turning the power on/off too often. Doing so
may corrupt the USB storage device data or the auditioning data.
nAudio recording is processed internally so auditioning volume will be appropriate when played on a computer. There-
fore, the playback sound might be distorted if you record at too high a volume. In this case, lower and adjust the volume
of each part with Volume Balance display (page 41) and the Mixing Console (page 91), etc., and try recording again.
1Call up the USB AUDIO RECORDER display.
2 Press the [7 ππ
ππ†† ††
]/[8 ππ
ππ†† ††
] (AUDITION) button to display the audio files (WAV data)
saved to the connected USB storage device.
3Press one of the [A]-[J] buttons corresponding to the file you want to listen to, then
press the [8 ††
††
] (AUDITION) button.
4Press the [EXIT] button to return to the USB AUDIO RECORDER display shown in step 4
of “Recording Your Performance as Audio” on the previous page.