Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-S900/S700 Owner’s Manual 91
Using, Creating and Editing Voices
Editing the Volume and Tonal Balance (MIXING CONSOLE)
The Mixing Console gives you intuitive control over aspects of the keyboard parts
and Song/Style channels, including volume balance and the timbre of the sounds.
It lets you adjust the levels and stereo position (pan) of each Voice to set the opti-
mum balance and stereo image, and lets you set how the effects are applied.
Basic Procedure
1Press the [MIXING CONSOLE] button to call up the MIXING CON-
SOLE display.
2Use the TAB [
][
®
] buttons to call up the relevant setting display.
For information on the available parameters, see the section “Adjustable
items (parameters) in the MIXING CONSOLE displays” on page 92.
3Press the [MIXING CONSOLE] button repeatedly to call up the MIX-
ING CONSOLE display for the relevant parts.
The MIXING CONSOLE displays actually consist of several different
part displays. The part name is indicated at the top of the display. The
various MIXING CONSOLE displays alternate among the following:
PANEL PART display STYLE PART display SONG CH 1-8 display
SONG CH 9-16 display
4Press one of the [A]–[J] buttons to select the desired parameter.
5Use the [1
ππ
ππ
]–[8
ππ
ππ
] buttons to set the value.

1, 3

5

44

2
Ab
out
P
arts
See below.
Instantly setting all parts to
the same value
Once you’ve selected a parame-
ter in step 4, you can instantly
set the same value to all other
parts. To do this, simultaneously
hold down one of the [A]–[J] but
-
tons, and use the [1]–[8] buttons
or the DATA ENTRY dial.