APPENDIX

 

 

 

Problem

Cause

What to Do

 

 

 

When making a recording from an

A DSP sound field program is selected or the

Turn off the DSP and the graphic equalizer.

audio CD to an MD, CD-R, etc., all

built-in graphic equalizer is used.

 

tracks are recorded as one track.

 

 

 

 

 

Program sources on an MD, CD-R,

You cannot make a recording from a CD-R,

Record the signals of such an MD, CD-R, etc. on

etc. which is a copy of an audio

MD, etc. which is a copy of an audio CD, to

the computer by sending the signals via an

CD, cannot be recorded on the

another CD-R, MD, etc. via the USB

analog connection.

computer via the USB connection.

connection or the digital terminal connection.

 

 

 

 

Signals inputted to your computer

Incorrect setting of the recording device on the

Correctly set the recording device on the

via the USB connection cannot be

computer.

computer. [Refer to “Recording on computer (via

recorded on the computer.

 

the USB connection”) on page 13.]

 

 

 

Different sounds are heard

Sound from the computer via the USB

Set the “USB Mix” setting to “OFF” if you do not

together.

connection may be mixed with sound from

want to hear mixed sounds.

 

other sources because the “USB Mix” setting

 

 

is set to “ON” with the Application Software.

 

 

 

 

Using this unit affects TV

The equipment may be too close to this unit.

Move the equipment away from this unit.

reception or the performance of

 

 

other equipment.

 

 

 

 

 

Left and right volume levels are

The level balance is not set to center on the

Set the level balance to center.

different.

“Balance” setting on the VIRTUAL panel in the

 

 

Application Software.

 

 

 

 

The remote control does not work.

The batteries of the remote control are weak.

Replace the batteries with new ones.

 

 

 

The remote control does not

Wrong distance or angle.

The remote control will function from a maximum

function properly.

 

range of 6 meters and no more than 30 degrees

 

 

off-axis from the front panel.

 

 

 

 

Direct sunlight or strong light (of an inverter

Reposition the main unit.

 

type fluorescent lamp etc.) is striking the

 

 

remote control sensor of the main unit.

 

 

 

 

When installing or using the Application Software

Problem

Cause

What to Do

 

 

 

 

 

 

 

Application does not start.

This unit and the computer is not connected

Connect this unit and the computer with the

 

 

 

with the USB cable.

USB cable.

 

 

 

 

 

 

 

 

The power cord is not plugged in or is not

Firmly plug in the power cord.

 

 

 

completely inserted.

 

 

 

 

 

 

APPENDIX

 

 

 

 

The driver software cannot be

The USB cable is not firmly connected

Disconnect the USB cable, and then connect it

 

 

 

installed successfully.

between this unit and the computer.

firmly again.

 

 

 

 

 

 

 

 

The power cord is not plugged in or is not

Firmly plug in the power cord.

 

 

 

completely inserted.

 

 

 

 

 

 

 

 

 

 

 

 

 

English

E-29