APPENDIX
When using the
Problem | Cause | What to Do | |
|
|
|
|
Crackling noise from time to time. | Interference from the starting motor of a | Position the FM antenna as high and as far | |
| nearby car. | away from nearby roads as possible. | |
|
|
|
|
|
|
| Use a coaxial cable for connecting the antenna. |
|
|
| |
| Interference from the thermostats of a nearby | Install a noise canceller on such an appliance. | |
| electric appliance. |
| |
|
|
| |
Noise increases when receiving a | Because of the characteristics of FM | Check the antenna connections. | |
stereo broadcast, or the reception | broadcasts, this is limited to cases where the |
| |
mode changes from stereo to | transmitter is far away or the antenna signal is |
| |
monaural unexpectedly. | weak. |
| |
|
|
| |
A desired station cannot be | Because of the characteristics of FM | Install a | |
received by the auto tuning | broadcasts, this is limited to cases where the | possible. | |
method. | transmitter is far away or the antenna signal is |
|
|
|
| ||
| weak. | Tune in to the station manually. | |
|
|
| |
Stereo broadcasts are noisy and | Weak antenna signal. | Install an antenna suitable for the electric field | |
the ST indicator flashes. |
|
| strength of your area. |
|
|
| |
| Not tuned correctly. | Retune. | |
|
|
| |
There is distortion or clear | There is multipath interference. | Change the position of the antenna. | |
reception cannot be obtained |
|
|
|
even when using a good quality |
|
|
|
FM antenna. |
|
|
|
|
|
| |
Preset stations cannot be | The preset memory has been erased. | Store the stations again. | |
selected. |
|
|
|
|
|
|
|
Depending on some computer hardware or operating systems, all functions of this unit cannot be used.You can refer to the following Yamaha website for details and related information.
http://www.yamaha.co.jp/audio/
Memory
The memory