CONNECTIONS

Connecting speakers

To reproduce multi-channel surround sounds with this unit, connect five speakers (Yamaha NS-U40P, etc.) to this unit as follows: a pair of front speakers to the FRONT L and R terminals, a center speaker to the CENTER terminal, and a pair of surround speakers to the REAR L and R terminals. When using only one pair of speakers, connect one speaker to the FRONT L terminal, and the other to the FRONT R terminal.

*When the supplied Application Software is installed on the computer connected to this unit, the Application enables you to make “Speaker Settings”. In the settings, you can select the speakers to use and not to use, and also set the sizes of the speakers to use. Refer to page 27 of the separate “OPERATION MANUAL” for details.

Notes

●Use speakers which do not have a built-in amplifier.

● Use speakers whose impedance is 4Ω or more.

●Connect the left speaker to the left speaker connector on this unit and the right speaker to the right speaker connector.

●Make sure that the + and – polarity markings of the speaker cables are observed and set correctly. If these cables are reversed, the sound will be unnatural and lack bass.

Front speaker (L)

Center speaker

Surround speaker (L)

 

 

 

ANALOG

 

 

R

L

 

PC IN

Front speaker (R)

ANTENNA

AUX

1

 

 

IN

 

 

FM ANT

AUX

2

75Ω UNBAL.

IN

 

REC

SUBOUT

WOOFER OUTPUT

R L

SPEAKERS

DIGITAL

–+

L

USB

 

FRONT

 

R

COAX

 

IN

 

PC

 

OPT

CENTER

IN

 

4Ω MIN.

 

/SPEAKER

–

+ AUX 1

 

OPT IN

L

Surround speaker (R)

REAR

OPT

 

OUT

R

 

(U.S.A. model)

E-6