Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha RX-V1 MAIN +, CENTER +, CENTER –, ■Using Speaker Cords, ■Connecting the Main Speakers, ■Connecting the Center Speaker

1 95

Download 95 pages, 3.57 Mb

Hookups

Connecting Speakers

This section explains how to connect speakers to the RX-V1. After you finish connecting your speakers, use the SET MENU to change the signal output settings according to the number and size of the speakers in your configuration.

Preparations

BANANA PLUG

Right Main		Left Main
Speaker A		Speaker A

B

MAIN

A

+++

–––

Right Main		Left Main
Speaker B		Speaker B
Center Speaker

■Using Speaker Cords

A speaker cord is actually a pair of insulated cables running side by side. One of the cables is colored or shaped differently, perhaps with a stripe, groove or ridge. To make sure you always connect speakers with the correct polarity, determine the difference between the cables of your speaker cord, make a note of which cable you plan to use for which polarity (+ and –), and always connect the speaker cords consistently.

1Strip off 9 mm (3/8 in.) of an inch of insulation from the ends of the cables.

2Twist the exposed wires of the cable together to prevent short circuits.

3Loosen the terminal knob by turning it counterclockwise.

4Insert only the exposed portion of the cable into the slot in the side of the terminal, and tighten the terminal knob.

Note:

•If your speaker cords have banana plugs, tighten the terminal knob and insert the plug into the end of the terminal.

Caution:

•Connect the speaker cords with care to avoid creating a short circuit. If you turn on the power and there is a short circuit, this unit may be damaged even though the protection circuit automatically shuts off the power.

■Connecting the Main Speakers

Before connecting any speaker cords, identify which terminals are for the right and left channels and also the + and – polarities. If you connect speakers with the wrong polarity (+ to –), the RX-V1 will not reproduce clear sound.

Connect the + and –terminals of your right and left Main speakers to the L and R MAIN + and –terminals on this unit.

■Connecting the Center Speaker

Connect the + terminal of your Center speaker to the CENTER +

20

SPEAKERS

FRONT

++

––

REAR

++

––

++

––

CENTER

REAR CENTER

terminal and the –terminal of your Center speaker to the CENTER – terminal.

Contents

Page Page 19For US customers only: FCC INFORMATION (for US customers only) Page Contents Introduction Preparations Basic Operation Advanced Operation Introduction Features Getting Started Controls and Functions Introduction Dolby Digital and Dolby Digital Surround EX DTS and DTS ES Comparing Surround Technologies Dolby Surround Digital Sound Fields (DSP) CINEMA-DSP:Dolby Digital + DSP and DTS + DSP Virtual CINEMA DSP and HP CINEMA DSP Multi-functionremote control Various Input and Output Jacks ■About Changing Batteries ■ About handling the remote control ~STANDBY/ON ŸRemote Control Sensor !Front Panel Display ⁄INPUT MODE @INPUT SELECTOR ﬁEFFECT ^6CH INPUT ﬂBALANCE &A/B/C/D/E ‡BASS EXTENSION ON/OFF Power Buttons Display Window Source Select Input Section Operation Section ~Infrared window ŸCLEAR ﬂ+/– &MUTE !RE-NAME ~DTS indicator ŸVIRTUAL indicator !Multi-informationdisplay ⁄STEREO indicator @Input source indicator ~RF (AC-3)input jack ŸAudio equipment jacks !Video equipment jacks ⁄Antenna input terminals @Speaker terminals Preparations Speaker System Configurations Speaker Placement Hookups On-ScreenDisplays (OSD) ■Eight or Seven Speaker Configuration –FullCinema DSP– ■Six Speaker Configuration –HiFi DSP– ■Five Speaker Configuration –Standard5.1 Channel– ■Four Speaker Configuration –MinimumRequirement– ■Placing the Main Speakers ■Placing the Center Speaker ■Placing the Front Effect, Rear and Rear Center Speakers ■When You Use a Projection Screen ■Placing the Subwoofers ■About the Dust Protection Cap ■Connecting a Turntable ■ Connecting a CD Player ■Connecting a Tape Deck TAPE 4 (REC) L and R jacks ■Connecting an MD or DAT Deck (REC) OPTICAL MD (PLAY) ■Connecting an LD Player LD VIDEO ■Connecting a TV or Digital TV D-TVVIDEO jack ■Connecting a Satellite Tuner or Cable TV Tuner (Set Top Box) ■Connecting a VCR VCR 1 IN VCR 1 OUT VCR 1 VIDEO IN jack VCR 1 VIDEO OUT jack ■Using Speaker Cords ■Connecting the Main Speakers MAIN + ■Connecting the Center Speaker CENTER + ■Connecting the Front Effect Speakers FRONT + ■Connecting the Rear and Rear Center Speakers REAR + REAR CENTER + ■Connecting a Rear Subwoofer WARNING ■Impedance Selector switch Front Effect: Rear: ~MAIN jacks ŸCENTER jacks !REAR CT jack ⁄SUBWOOFER jacks @FRONT 6CH INPUT ■Connecting the AC Power Cord ■AC OUTLETS ■ Connecting the indoor FM antenna ■Optional outdoor FM antenna ■Optional outdoor AM antenna ■Connecting the AM loop antenna AM ANT ON SCREEN Summary of SPEAKER SET items 1A through 1G BASS TREBLE BALANCE BASS EXTENSION Page Page Basic Operation Basic Playback AM/FM Tuner Basic Recording SYSTEM POWER STANDBY Select this To reproduce the signal source: from this equipment ■BGV (Back Ground Video) Function Page 1Set 10KEY/DSP to DSP PROGRAM ■Virtual CINEMA DSP and HP CINEMA DSP ■ Normal Stereo Reproduction AM/FM TUNING MODE (AUTO/MAN’L MONO) ■Manually presetting stations Press MEMORY (MAN’L/AUTO FM) 5Press MEMORY (MAN’L/AUTO FM) ■Automatically presetting stations MEMORY 3 Press PRESET/TUNING%or Press PRESET/TUNING (EDIT) again REC OUT/ ZONE ■Special considerations when recording DTS software Advanced Operation SET MENU Items Remote Control Features Adjusting the Levels of the Effect Speakers Setting the Sleep Timer Page ■General procedure for adjusting items 1Set PARAMETER/SET MENU to SET MENU ■1A. CENTER SP (Center Speaker Mode) ■1B. MAIN SP (Main Speaker Mode) ■1C. REAR L/R SP (Rear Speaker Mode) ■1D. REAR CT SP (Rear Center Speaker Mode) ■1E. LFE/BASS OUT (Bass Out Mode) ■1F. FRNT EFCT SP (Front Effect Speaker Mode) ■1G. MAIN LEVEL VOLUME + ■About the Test Tone ■3A. LFE LEVEL ■3B. D-RANGE(Dynamic Range) ■4A. LFE LEVEL Page Page 6.1/ES Page Page <Main Unit Control Area <Component Control Area ■SOURCE SELECT SELECT V-AUX CBSAT TUNER ■Operating a Tuner (TUNER Area) ■ Operating a Tape Deck (TAPE Area) ■Operating a CD Player (CD Area) ■Operating an MD Recorder (MD Area) ■Operating an LD Player (LD Area) ■ Operating a DVD Player (DVD Area) ■Operating a VCR (VCR 1 / VCR 2 / VCR 3 Area) ■Operating a TV or Digital TV (D-TVArea) ■Operating a Cable or Satellite TV Tuner (CBSAT Area) ■Free Area (OPTN and PHONO Areas) POWER Page Page ■Operating the Macro Feature 1Set MACRO ON/OFF to ON ■Programming a Macro Page Page 1Set PARAMETER/SET MENU to PARAMETER LEVEL ■To set the Sleep Timer ■To cancel the Sleep Timer ■A sample of system configuration and connections ■Special considerations when using DTS software For DTS encoded LDs or DVDs For DTS encoded compact discs SOURCE SELECT ZONE2 Additional Information Digital Sound Field Processing (DSP) Hi-Fi DSP-SoundField Program CINEMA-DSP CINEMA-DSPSound Field Program Page ■ Europe Hall A ■ Europe Hall B ■ Europe Hall C ■ U.S.A. Hall D ■ Europe Hall E Page ■Dolby Pro Logic + DSP Sound Field Effect ■Dolby Digital/DTS + DSP Sound Field Effect ■Dolby Digital Matrix 6.1/DTS ES + DSP Sound Field Effect Table of Program Names for Each Input Format ■Program Groups 7~9 ■Program Groups 10~12 ■ Pop/Rock ■ Classical/Opera ■ Pavilion ■ Mono Movie ■ Variety/Sports PARAMETER/SET MENU ■ To reset some of the parameters to the ■ To reset all of the parameters back to the factory preset values Page Page Page Page Appendix Troubleshooting Reference Chart for the INPUT and OUTPUT Jacks CINEMA - EQ Frequency Characteristics Specifications General Page Tuner Remote Control Page Audio Section Video Section FM Section AM Section General Page ■Remote Control ■TUNER ■CD ■TAPE ■MD ■LD ■VCR 1/VCR 2/VCR ■CBSAT ■DVD ■D-TV