Yamaha RX-V1 Remote Control

Troubleshooting

Remote Control

Problem	Possible Cause	What to Do
The remote control does not	The batteries are dead.	Replace the batteries with new ones and
work.		press RESET (see page 5).
	The internal microcomputer has “frozen”.	Press RESET on the remote control (see
		page 5).
The remote control does not	Wrong distance or angle.	The remote control will function within a
function properly.		maximum range of 6 m (20 feet), no more
		than 30 degrees off-axis from the front panel
		(see page 5).
	Direct sunlight or lighting (such as an	Change the position of this unit.
	inverter type of fluorescent lamp) is
	striking the remote control sensor of this
	unit.
	The internal microcomputer has “frozen”.	Press RESET on the remote control (see
		page 5).
The remote control	The batteries of this remote control and/or	Replace the batteries (and press RESET on
does not “learn” new functions.	the other remote control are too weak.	the remote control) (see page 5).
(The TRANSMIT indicator does
not light up or flash.)	The distance between the two remote	Place the remote controls at the proper
	controls is too far or near.	distance (see page 62).
	The signal coding or modulation of the	Learning is not possible.
	other remote control is not compatible with
	this remote control.
	Memory capacity is full.	Further learning is not possible without
		deleting unnecessary new functions (see
		page 66).
	The internal microcomputer has “frozen”.	Press RESET on the remote control (see
		page 5).
Continuous functions such as	The learning process is incomplete.	Be sure to press and hold the function button
volume are learned, but		on the other remote control until TRANSMIT
operate only for a moment		begins flashing slowly.
before stopping.

Appendix

86