Yamaha RX-V1 DSP, SUR, BASS, MENU, TEST, / DTS, TREBLE, BALANCE, English, PARAMETER, 10KEY/DSP, PARAMETER/SET, BASS EXTENSION, Summary of SPEAKER SET items 1A through 1G

Speaker Settings

The RX-V1 has seven SPEAKER SET items in the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings. If the initial settings are not appropriate for your speaker configuration, change the settings in the SET MENU (see page 41).

Summary of SPEAKER SET items 1A through 1G.

Item	Description	Initial Setting
1A. CENTER SP	Selects the Center channel output mode according to the size of the Center speaker.	LRG
	The possible settings are LRG (large), SML (small) and NONE.
1B. MAIN SP	Selects the Main channel output mode according to the size of the Main speakers.	LARGE
	The possible settings are LARGE and SMALL.
1C. REAR L/R SP	Selects the Rear channel output mode according to the size of the Rear speakers.	LRG
	The possible settings are LRG (large), SML (small) and NONE.
1D. REAR CT SP	Selects the Rear center channel output according to the size of the Rear Center speaker.	LRG
	The possible settings are LRG (large), SML (small) and NONE.
1E. LFE/BASS OUT	Selects a speaker for the LFE/Bass signal output.	BOTH
	The possible settings are SW (subwoofer), MAIN, and BOTH.
1F. FRNT EFCT SP	Selects the Front Effect signal output mode for the Front Effect signals.	YES
	The possible settings are YES and NONE.
1G. MAIN LEVEL	Selects the output level for the Main channel signal.	Normal
	The possible settings are Normal and –10 dB.

Speaker Output Levels

This section explains how to set the speaker output levels using the test tone generator. The Dolby Surround test is for balancing the output levels of the six speakers required for surround sound systems. The DSP test is for balancing the Front Effect speakers with the Main speakers for the DSP sound field programs.

Before You Begin

1		0	1	1	0	1	1	0	1	1	Set BASS, TREBLE and BALANCE on the front panel to “0” (the
	BASS			TREBLE			BALANCE
2			2	2		2	2		2		center position) and turn off BASS EXTENSION.
3			3	3		3	3		3
4			4	4		4	4		4
– 5			5 +	– 5		5 +	L 5		5 R
										2 Sit in the main listening position and set PARAMETER/SET
				PARAMETER							MENU on the remote control to PARAMETER.
				SET MENU						3	Set 10KEY/DSP on the remote control to DSP and press	/ DTS
											SUR.
				10KEY		DSP				4 Press TEST on the remote control once or twice to select the test
											you want.
											• Select “TEST DOLBY SUR.” to match the output levels of the Center,
											Rear Center and left and right Rear speakers to the left and right Main
											speakers.
											• Select “TEST DSP” to match the output levels of the Front Effect
											speakers to the Main speakers.

English

27