Specifications
Minimum RMS Output Power per Channel |
|
|
MAIN L/R, CENTER, REAR L/R/C |
|
|
(20 Hz to 20 kHz, 0.015% THD, 8 ohms) | 110 W | |
FRONT L/R (1 kHz, 0.05% THD, 8 ohms) | ||
Dynamic Power (IHF) |
|
|
MAIN L/R (8/6/4/2 ohms) | 150/180/240/340 W | |
Dynamic Headroom |
|
|
MAIN L/R (8 ohms) | 1.3 dB | |
Power Band Width |
|
|
MAIN L/R (55 W, 0.04% THD, 8 ohms) |
| |
10 Hz to 50 kHz | ||
Damping Factor |
|
|
MAIN L/R (20 Hz to 20 kHz, 8 ohms) | 200 or more | |
Input Sensitivity/Impedance (110 W/8 ohms) |
|
|
CD, etc. | 150 | |
PHONO MM | 2.5 | |
MAIN IN | 1 | |
Output Level/Impedance |
|
|
REC OUT | 150 mV/600 ohms | |
MAIN OUT | 1 V/1.2 | |
SUBWOOFER [SPLIT L/R] | 2 V/1.2 | |
[MONO] | 4 V/1.2 | |
PHONES Output | 150 mV/100 ohms | |
Frequency Response (10 Hz to 100 kHz) |
|
|
CD, etc. to MAIN L/R SP. OUT | ||
Total Harmonic Distortion (20 Hz to 20 kHz) |
|
|
CD, etc. to MAIN OUT (1 V) | 0.005% or less | |
MAIN IN to SP OUT (55 W/8 ohms) | 0.005% or less | |
Signal to Noise Ratio |
|
|
(Input shorted, EFFECT off) | 96 dB or more | |
Residual Noise |
|
|
MAIN L/R SP. OUT | 150 μV or less | |
Channel Separation (Vol | ||
1 kHz/10 kHz | 70 dB/60 dB or more | |
Tone Control (MAIN L/R) |
|
|
Bass Boost/Cut | ±10 dB (50 Hz) | |
Treble Boost/Cut | ±10 dB (20 kHz) | |
Bass Extension | +6 dB (60 Hz) |
|
| Video Signal Type | NTSC | |
|
| [Australia model] | PAL | |
|
| Composite Video Signal Level | 1 | |
|
|
|
| |
|
| Y | 1 | |
|
| |||
Appendix |
| C | 0.286 | |
| Component Video Signal Level |
|
| |
|
|
|
| |
|
| Y | 1 | |
|
| PB/CB, PR/CR | 0.7 | |
|
| Maximum Input Level | 1.5 | |
|
| Signal to Noise Ratio | 50 dB or more | |
88 | Frequency Response |
|
| |
(MONITOR OUT) | 5 Hz to 10 MHz, |
Tuning Range | 87.5 to 107.9 MHz |
[Australia model] | 87.5 to 108.0 MHz |
50 dB Quieting Sensitivity (IHF, 75 ohms, 100% mod., 1 kHz) | |
Mono | 1.6 μV (15.3 dBf) |
Stereo | 23 μV (38.5 dBf) |
Usable Sensitinity (75 ohms) [Australia model only] | |
DIN, Mono (S/N 26 dB) | 0.9 μV |
DIN, Stereo (S/N 46 dB) | 28 μV |
| |
(IHF) Mono/Stereo | 81 dB/75 dB |
[Australia model]
(DIN Weighted, 40 kHz Dev.) Mono/Stereo
75 dB/69 dB | |
Harmonic Distortion (1 kHz) |
|
Mono/Stereo | 0.1/0.2% |
Stereo Separation (1 kHz) | 48 dB |
Frequency Response |
|
20 Hz to 15 kHz | 0±1 dB |
Tuning Range | 530 to 1,710 kHz |
[Australia model] | 531 to 1,611 kHz |
Usable Sensitivity | 300 μV/m |
52 dB |
Power Supply | AC 120 V, 50/60 Hz |
[Australia model] | AC 240 V, 50 Hz |
Power Consumption | 550 W |
AC Outlets (Total 120 W maximum) | 3 (Switched) |
[Australia model] (100 W maximum) | |
Dimensions (W x H x D) | 471 x 211 x 473 mm |
Weight | 28 kg (61 lbs 11oz) |
Accessories | Remote control |
| Alkaline batteries |
| Quick reference guide |
| AM loop antenna |
| Indoor FM antenna |
Antenna adapter (Except for Australia model)
*Specifications are subject to change without notice.