Yamaha RX-V10 English, Open/close the control door

0RDS MODE/FREQ button

When an RDS station is received, pressing this button changes the display mode into the PS mode, PTY mode and/or RT mode (if the station employs those RDS data services), and frequency display in turn.

APTY SEEK MODE button

When this button is pressed, the unit turns into the PTY SEEK mode.

BPTY SEEK START button

Press this button to begin searching for a station after the desired program type is selected in the PTY SEEK mode.

CEON button

Press this button to select a desired program type (NEWS, INFO, AFFAIRS, SPORT) when you want to call a radio program of that program type automatically.

DFM/AM buttons

Press this button to switch the reception band to FM or AM.

EA/B/C/D/E button

Press this button to select a desired group (A–E) of preset stations.

FTUNING MODE (AUTO/MAN’L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that “AUTO” lights up on the display. To select the manual tuning mode, press this button so that “AUTO” goes off.

GMEMORY (MAN’L/AUTO FM) button

When this button is pressed, the MEMO indicator flashes for about 5 seconds. During this period, select a desired preset station number by pressing the PRESET STATIONS button once or more, and then press the MEMORY button once again to enter the displayed station into the memory.

When this button is pressed and held for about 3 seconds, the automatic preset tuning begins. (Refer to page 24 for details.)

HPRESET STATIONS/TUNING button

Functions as the PRESET STATIONS button when “PRESET” is illuminated on the display, and functions as the TUNING button when “PRESET” is not illuminated on the display.

PRESET STATIONS:

Selects a preset station number (from 1 to 8) whenever the left or the right side of this button is pressed.

TUNING:

Used for tuning. Press the side to tune in to higher

frequencies, and press the side to tune in to lower frequencies.

ICENTER MODE button

Selects a center channel output mode (NORMAL, WIDE or PHANTOM). (For details, refer to page 18.)

JPROGRAM button

Whenever this button is pressed, the built-in digital sound field processor turns on and the currently selected DSP program changes sequentially and then the digital sound field processor turns off, and those are repeated.

KKEY MODE/EDIT button

Whenever this button is pressed, “PRESET” appears and disappears on the display alternately. This is for switching the function of the PRESET STATIONS/TUNING button.

This button is also used to exchange the places of two preset stations with each other.

LTone controls

BASS

Used to increase or decrease the low frequency response. The 0 position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The 0 position produces flat response.

MBALANCE control

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

English

Open/close the control door

When it is not necessary to operate controls inside the control door, close the door.

To open the door

To close the door