CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
1 | 23 | 4 | 5 | 6 |
|
|
| INPUT | VOLUME |
| NATURAL SOUND STEREO RECEIVER |
|
| |
|
| 5CH/2CH |
|
POWER
|
|
|
| PTY SELECTOR |
|
| 0 | I0 | |
|
|
| PRESET STATIONS |
|
|
|
|
| |
PHONES SPEAKERS RDS MODE/FREQ | EON | A/B/C/D/E | TUNING | KEY MODE | BASS | TREBLE | BALANCE | ||
B |
|
|
|
| 0 |
| 0 |
|
|
|
|
|
|
|
|
|
|
| |
ON OFF |
|
|
| EDIT |
|
|
|
|
|
| FM/AM | TUNING | CENTER |
|
|
|
|
| |
PTY SEEK | MODE MEMORY | MODE PROGRAM |
|
|
|
|
| ||
A |
|
|
| – | + | – | + | L | R |
MODE | START |
| AUTO/MAN’L MONO MAN’L/AUTO FM |
|
|
|
|
|
|
| 7 8 9 =ABC DEF GHI J K L | M |
Parts in the shaded areas are provided for Europe and U.K. models only.
The power indicator (2) is provided for Europe, U.K. and General models only.
1POWER switch
Press this switch to switch the power on. Press it again to switch the power off.
2Power indicator
<Europe, U.K. and General models only>
Lights up fully while the power is on.
*Standby mode
While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the standby mode. In this mode, the power indicator is half illuminated.
3Remote control sensor
Receives signals from the remote control transmitter.
4Display panel
6VOLUME control
Used to raise or lower the volume level.
7Control door
See page 13 for how to open and close the control door.
8PHONES jack
When you listen with headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the front speakers through headphones.
When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position and switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the EFFECT key.
PHONES
Shows station frequencies and various information. (Refer to page 16 for details.)
5INPUT selector
Selects a program source to listen to and/or watch. When turned, the name of a selected source appears on the display.
PTY SELECTOR |
|
<Europe and U.K. models only> | 9SPEAKERS switches |
When this unit is in the PTY SEEK mode, turning this control changes the currently selected program type.
Set the switch A or B (or both A and B) for the front speaker system (connected to this unit) you will use to the ON position. Set the switch for the front speaker system you will not use to the OFF position.
12