PRESET TUNING

MANUAL PRESET TUNING

English

This unit can store station frequencies selected by tuning operation. With this function, you can recall any desired station by only selecting the preset station number where it is stored. Up to 40 stations (8 stations x 5 groups) can be stored.

3, 1

4, 3

2

To store stations

2, 5

1 Tune to a desired station.

(Refer to the previous page for tuning procedure.)

2 MEMORY

To recall a preset station

1 Select the group of preset stations.

A/B/C/D/E

MAN’L/AUTO

MEMO PRESET AUTO

Flashes on and off for about 5 seconds.

3 Select a desired group (A – E) of preset stations confirming it on the display.

A/B/C/D/E

MEMO PRESET

 

AUTO

4 Select a preset station number (1–8) where you want to program the station before “MEMO” goes off from the display.

PRESET STATIONS

TUNING

5

MEMORY

 

 

MAN’L/AUTO

PRESET

 

FM

MHz 0 l00

Shows the displayed station has been programmed to A1.

*In the same way, program other stations to A2, A3 ... A8.

*You can program more stations to preset station numbers on other groups in the same way by selecting other groups in step 3.

2 If “PRESET” is not illuminated on the display, you cannot recall the preset stations. Press the KEY MODE button to turn it on.

KEY MODE

EDIT

3 Select the preset station number.

PRESET STATIONS

TUNING

Notes

•A new setting can be programmed in place of the former one.

•For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency.

Memory back-up

The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is set off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the PRESET TUNING steps.

23