6 9
6 Select the center channel output mode suitable for your speaker configuration.
(Refer to “SPEAKER CONFIGURATION” on page 6.)
CENTER
MODENORMAL
WIDE
PHANTOM
On the feature of each mode, refer to the “Note” shown below.
7
TEST
TEST
Flashes continuously.
Note
In step 6, when you select the center channel output mode, note the following.
For 5 speaker configuration)
NORMAL: Select this mode when you use a center speaker that is smaller than the front speakers. In this mode, the bass tone will be output from the front speakers.
WIDE: Select this mode when you use the center speaker approximately same sized as the front speakers.
For 4 speaker configuration)
PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right front speakers.
– | LEVEL | + | DELAY/REAR | TEST | EFFECT | 7 |
/CENTER | ||||||
| PROGRAM |
| PROLOGIC | ENHANCED ON/OFF | ||
|
|
| VCR |
| DVD/LD |
|
|
|
|
| 2CH/5CH |
| |
DIR A DIR B | REC/PAUSE PLAY |
|
| |||
|
|
|
| A/B | TAPE |
|
– | PRESET | + | A/B/C/D/E | TUNER |
| |
DISC PLAY CD
PHONO
POWER VOLUME
SLEEP
8
8 Turn up the volume.
VOLUME
You will hear a test tone (like pink noise) from the left front speaker, then the center speaker, then the right front speaker, and then the rear speakers, for about two seconds each. The display changes as shown below.
(L and R)
*The test tone from the left rear speaker and the right rear speaker will be heard at the same time.
9 Adjust the BALANCE control so that the effect sound output level of the left front speaker and the right front speaker are the same.
BALANCE
L R
18