To play a source with the digital sound field processor

2, 3

1 Follow steps 1 – 6 shown in “BASIC OPERATIONS” on page 20.

2 Turn the DSP on, so that a program name appears on the display.

PROGRAM

EFFECT

 

or

ON/OFF

*Pressing the PROLOGIC or ENHANCED key turns the DSP on and selects the corresponding program directly. (If you press either of these buttons, you can skip step 3.)

PROLOGIC ENHANCED

3 Select the desired program that is suitable for the source.

PROGRAM

PROGRAM

or

PRO LOGIC

The selected program name is shown on the display.

2

DELAY/REAR

LEVEL + /CENTER TEST EFFECT

3

PROGRAM

PROLOGIC ENHANCED ON/OFF

2

 

VCR

DVD/LD

 

2CH/5CH

 

DIR A DIR B

REC/PAUSE PLAY

 

 

 

 

A/B

TAPE

 

 

PRESET

+ A/B/C/D/E

TUNER

 

4 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on page 33 and 34.)

Notes

If you prefer to cancel the DSP, press the EFFECT key. The sound will be the normal 2-channel stereo without surround sound effect.

When CONCERT VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT HALL is selected, no sound is heard from the center speaker.

When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.

When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE control, the relationship between the center and rear channels may produce an unnatural effect.

32