1Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

2TRANSMIT indicator

Flashes while the remote control is sending signals.

3STANDBY

Sets this unit in the standby mode.

4SYSTEM POWER

Turns on the power of this unit.

5Input selector buttons

Select the input source.

6Display window

Shows the selected source component that you are controlling.

7SOURCE SELECT k/n

Selects the source component without switching the input.

810KEY/DSP

Selects the numeric button (10KEY) mode or DSP mode.

9DSP program group/Numeric buttons

Select DSP programs or numbers according to the position of 10KEY/DSP. (Press a button repeatedly to select a DSP program within that group.)

06.1/ES

Turns on or off the Dolby Digital Matrix 6.1 or DTS ES decoder with 10KEY/DSP set to the DSP position.

qA/B/C/D/E

Selects one of the 5 preset station groups.

wPRESET +/–

Selects a preset station number (1 to 8).

eRE-NAME

Used for changing the input source name in the display window (see page 59).

rCLEAR

Used for clearing functions acquired when using the learn and rename features, programmed macros, and set manufacturer codes (see pages 59 and 60).

tLEARN

Used for setting up the manufacturer code or for programming the functions of other remote controls (see pages 54 to 56).

CONTROLS AND FUNCTIONS

yMACRO

Used to program a series of operations for control by a single button (see page 58).

uMACRO ON/OFF

Turns the macro function on and off.

i6CH INPUT

Selects the source connected to the 6CH INPUT jacks.

oMUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

pVOLUME +/–

Increases or decreases the volume level.

aEFFECT

Switches the effect speakers (center, rear and rear center (see page 17)) on and off. If the output of these speakers is turned off, all Dolby Digital and DTS audio signals except for the LFE channel are directed to the left and right main channels.

sCover

Slides down to show the setup buttons.

dLEVEL

Selects the effect speaker channels (center, rear, rear center (see page 17) and subwoofer) so you can adjust their output level independently.

fON SCREEN

Selects the on-screen display (OSD) mode for your video monitor.

gSLEEP

Sets the sleep timer.

hTEST

Outputs the test tone.

jPARAMETER/SET MENU

Selects the PARAMETER mode or SET MENU mode.

kCursor buttons k/n/–/+

Select and adjust DSP program parameters and SET MENU items according to the position of PARAMETER/ SET MENU.

lRESET

Press this button after you have changed the batteries or when the remote control stops working properly. (Pressing RESET does not clear the acquired functions.)

INTRODUCTION

English

7