uMACRO

Used to program a series of operations for control by a single button (see page 47).

iMACRO ON/OFF

Turns the macro function on and off.

oÅ and ı

Switch the control area for the extra components that are not connected to this unit without changing the input.

pInput selector buttons

Select the input source and change the control area.

a6CH INPUT

Selects the source connected to the 6CH INPUT jacks.

sDSP program/Numeric buttons

Select DSP programs or numbers according to the position of 10KEY/DSP.

dMUTE

Mutes the sound. The MUTE indicator turns on when the MUTE function is on. Press again to restore the audio output to the previous volume level.

fVOLUME +/–

Increases or decreases the volume level.

gSTEREO/EFFECT

Switches the normal stereo or DSP effect reproduction. When STEREO is selected, 2-channel input signals are directed to the main left and right speakers without effect sounds. All Dolby Digital and DTS audio signals except for the LFE channel are also directed to the main left and right speakers.

hPARAMETER/SET MENU

Selects the PARAMETER mode or SET MENU mode.

jCursor buttons k/n/–/+

Select and adjust DSP program parameters and SET MENU items according to the position of PARAMETER/ SET MENU.

kCover

Slides down to use the various setup buttons. Slides up when these buttons are not being used.

CONTROLS AND FUNCTIONS

Using the Remote Control

INTRODUCTION

30°

30° Approximately 6 m (20 feet)

 

 

 

 

 

 

 

 

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

■Handling the remote control

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–high humidity or temperature such as near a heater, stove or bath;

–dusty places; or

–in places subject to extremely low temperatures.

English

7