Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings.
Press the corresponding numeric button for the DSP program that you want to initialize.
The asterisk (*) next to the program number means that the parameter values have been changed.
9 PARAM. INI
1 2 3 *4
*5 6 7 8
9 *10 11
Press No . Key
Notes
•You cannot initialize the individual DSP programs within a group separately.
•When “14 MEMORY GUARD” is set to ON (see page 67), you cannot initialize any program groups.
•Once you initialize a DSP program group, you cannot automatically revert to the previous parameter settings.
SET MENU
2 Press
10 LFE LEVEL
≥SPEAKER ………… - 11dB HEADPHONE ………… 0dB
Note
•Adjust the LFE level according to the capacity of your subwoofer or headphones.
11 D-RANGE (dynamic range)
Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals.
11 D-RANGE
≥S P :
M A X S T D M I N
H P :
M A X S T D M I N
10 LFE LEVEL
This setting is effective only when this unit decodes Dolby Digital or DTS signals.
Use this feature to adjust the output level of the LFE
Control range (dB):
HEADPHONE
Initial setting: 0 dB for both SPEAKER and
HEADPHONE
1 Press k/ nto select the item to be adjusted.
10 LFE LEVEL
≥SPEAKER ……………… 0dB HEADPHONE ………… 0dB
Choices: MAX, STD, MIN
Initial setting: MAX (for both speakers and headphones)
MAX
Select the “MAX” setting for feature films.
STD
Select the “STD” (Standard) setting for general use.
MIN
Select the “MIN” setting for listening to sources at extremely low volume levels.
OPERATION | ADVANCED |
|
|
English
65