13DISPLAY SET

13 DISPLAY SET

≥D I M M E R … … … … … … … … … 0 O S D S H I F T … … … … … … 0 G R A Y B A C K … … … A U T O V CONV .……………… OFF

■DIMMER

You can adjust the brightness of the front panel display.

Control range: –4 to 0

Initial setting: 0

■OSD SHIFT (OSD off-set position)

This setting is used to adjust the vertical position of the OSD.

Control range: +5 (downward) to –5 (upward)

Initial setting: 0

Press + to lower the position of the OSD. Press – to raise the position of the OSD.

■GRAY BACK

Selecting AUTO for the on-screen display setting displays a gray background when there’s no video signal input. Nothing is displayed on the screen including the on- screen display if OFF is selected.

Choices: AUTO, OFF

Initial setting: AUTO

Note

•If “GRAY BACK” is set to OFF, no information will be displayed on the screen when video signals are not being input.

SET MENU

14 MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other settings on this unit.

Choices: ON, OFF

Initial setting: OFF

14 MEMORY GUARD

OFF ON

-/+ : Select / : Exit

Select ON to protect the following features:

•DSP program parameters

•All SET MENU items

•Center, rear speakers, rear center, and subwoofer levels

•The on-screen display (OSD) mode

Notes

•When “14 MEMORY GUARD” is set to ON, you cannot use the test tone.

•When “14 MEMORY GUARD” is set to ON, you cannot select any other SET MENU items.

OPERATION

ADVANCED

 

 

■V CONV. (Video conversion)

Use this feature to turn on/off the function to convert composite signals to S-video signals to output through the S-video jack when no S-video signals are input.

Choices: ON, OFF

Initial setting: OFF

OFF

Select this not to convert composite signals to S-video signals.

ON

Select this to convert composite signals to S-video signals.

English

67