Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha RX-V2300 ADJUSTING THE SPEAKER OUTPUT LEVELS, SUR.), Before You Begin, Using the Test Tone (TEST DOLBY

1 91

Download 91 pages, 1.8 Mb

ADJUSTING THE SPEAKER OUTPUT LEVELS

This section explains how to adjust the speaker output levels by using the test tone generator. When this adjustment is made, the output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor, and various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic , DTS, DTS ES, and DTS Neo: 6).

Note

•Since this unit cannot enter the test mode while headphones are connected to this unit, be sure to unplug the headphones from the PHONES jack when using the test tone.

Using the Test Tone (TEST DOLBY

SUR.)

Use the test tone to balance the output levels of the 6 speakers required for a surround sound system. The adjustment of each speaker output level should be made at your listening position with the remote control.

	A/B/C/D/E PRESET
	TV INPUT	MUTE		3
TV VOL	CH		VOLUME
	TV MUTE	STEREO
	DISC	EFFECT
			PARAMETER	1
ON SCREEN	LEVEL
			SET MENU
SLEEP	TEST
2, 5				4

PREPARATION

Before You Begin

VOLUME

NATURAL SOUND AV RECEIVER RX-V2300

STANDBY /ON

		6CH	INPUT	MODE
					PRESET/	PRESET	TUNING	BASS		TREBLE
				A/B/C/D/E	TUNING	/TUNING FM/AM MEMORY	MODE	BASS		TREBLE
SPEAKERS		BASS	PROCESSOR			MAN'L/AUTO FM	AUTO/MAN'L MONO
A	B	EXTENSION	DIRECT			MAN'L/AUTO FM	AUTO/MAN'L MONO
				STEREO	PROGRAM
				REC OUT /ZONE 2
						SILENT	VIDEO AUX	+	–	+
							–	+	–	+

2

3

3

1 Turn on the video monitor connected to this unit.

2 Press SPEAKERS A or B	SPEAKERS
	A	B

to select the main speakers to be used.

If you are using two sets of the main speakers, press both A and B.

3 Set the BASS and TREBLE controls on the front panel to the center position and turn off BASS EXTENSION and PROCESSOR DIRECT by pressing the buttons.

“BASS EXT. OFF” and “P. DIRECT OFF” appear on the front panel display.

BASSTREBLE

BASS PROCESSOR

EXTENSION DIRECT

1 Set PARAMETER/SET	PARAMETER
MENU on the remote
control to PARAMETER.	SET MENU



2 Press TEST to output the
test tone.	TEST
test tone.

3 Adjust the volume so you can hear the test tone.

VOLUME

–	+	–	+
			Set to OFF.

English

25

Contents

AV Receiver IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES GETTING STARTED Checking the Package Contents Installing Batteries in the Remote Control CONTROLS AND FUNCTIONS Front Panel ■Opening and closing the front panel door Remote Control Using the Remote Control Front Panel Display Rear Panel SPEAKER SETUP Speakers to Be Used Speaker Placement Connecting the Speakers ■SUBWOOFER jack ■IMPEDANCE SELECTOR switch CONNECTIONS Before Connecting Components Connecting Video Components Page Page Connecting Audio Components Page Connecting the Antennas Connecting to an External Amplifier Connecting to the 6CH INPUT Jacks Connecting the Power Supply Cords Turning on the Power ON-SCREENDISPLAY (OSD) Selecting the OSD Mode OSD Modes P01 CONCERT HALL SPEAKER MODE SETTINGS Summary of SPEAKER SET Items 1A through 1G ADJUSTING THE SPEAKER OUTPUT LEVELS SUR.) Before You Begin TEST DOLBY SUR BASIC PLAYBACK ■BGV (background video) function ■To mute the sound ■When you have finished using this unit Input Modes and Indications Selecting a Sound Field Program Selecting PRO LOGIC PRO LOGIC or Neo: ■Virtual CINEMA DSP ■SILENT CINEMA DSP ■Normal Stereo Reproduction ■Displaying the information about the input source DIGITAL SOUND FIELD PROCESSING (DSP) Understanding Sound Fields Hi-FiDSP Programs CINEMA-DSP Straight Decode Sound Field Effect Features of DSP Programs Page Table of Program Names for Each Input Format TUNING Automatic and Manual Tuning Presetting Stations ■Manually presetting stations A :AM 630 kHz C3:AM 630 kHz C :AM 630 kHz Tuning in to a Preset Station MHz Exchanging Preset Stations BASIC RECORDING REMOTE CONTROL FEATURES Control Area Setting the Manufacturer Code Learn Feature Changing the Source Name in the Display Window Using the Macro Feature ■Operating the macro ■Programming a macro Clearing Learned Functions Macros, Renamed Source Names and Setup Manufacturer Codes Clearing a Learned Function ■SOURCE SELECT k / n ■OPTN (option) area ■Zone 2 (U.S.A., Canada and Australia models only) Each Component Control Area Operating a TV/digital TV ■Operating an LD player (D-TV/LDarea) ■Operating a CD player (CD area) ■Operating a CD recorder (CD-Rarea) or an MD recorder (MD/TAPE area) ■Operating a tape deck (MD/TAPE area) ■Operating a tuner (TUNER area) ■Operating the component set in Å or ı SET MENU Adjusting the Items on the SET MENU SET MENU 1/4 2 LOW FRQ TEST 1SPEAKER SET (speaker mode settings) 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D REAR CT SP 1E LFE/BASS OUT 1F MAIN LEVEL 1G SP B SET 2 LOW FRQ TEST 3 L/R BALANCE 4HP TONE CTRL (headphone tone control) 4 HP TONE CTRL 5CENTER GEQ (center graphic equalizer) 5CENTER GEQ 5 CENTER GEQ 6 INPUT RENAME 6 INPUT RENAME 7 I/O ASSIGNMENT 7A CMPNT-VINPUT 7B OPTICAL OUT 8INPUT MODE (initial input mode) 8INPUT MODE 9 PARAM. INI 10 LFE LEVEL 11 D-RANGE(dynamic range) 11 D-RANGE 10 LFE LEVEL 12 SP DELAY 12 SP DELAY 13DISPLAY SET 13 DISPLAY SET 14 MEMORY GUARD 14 MEMORY GUARD 15 6CH INPUT SET 15A CENTER to 15B SWFR to 16 ZONE2 SET 16 ZONE2 SET ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS SLEEP TIMER Setting the Sleep Timer Canceling the Sleep Timer ZONE 2 (for U.S.A., Canada and Australia models) Zone 2 Connections Remote Control in Zone SOUND FIELD PROGRAM PARAMETER EDITING What Is a Sound Field Sound Field Program Parameters Changing Parameter Settings P05 ROCK CONCERT Resetting a Parameter to the Factory-setValue DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS ■ LIVENESS Control Range 0 – ■ S. DELAY (Surround Delay) Control Range 0 – 49 msec (The range depends on the signal format.) ■ REV. TIME (Reverberation Time) Control Range 1.0 – 5.0 sec ■ REV. DELAY (Reverberation Delay) Control Range 0 – 250 msec ■ REV. LEVEL (Reverberation Level) For 6ch Stereo ■ CT LEVEL (Center Level) ■ RL LEVEL (Rear Left Level) ■ RR LEVEL (Rear Right Level) ■ RC LEVEL (Rear Center Level) TROUBLESHOOTING Page Page ■Tuner ■ Remote control GLOSSARY ■S VIDEO signal ■Component video signal ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits ■I/O assignment (SET MENU) SPECIFICATIONS