REMOTE CONTROL FEATURES

■Operating the macro

 

 

 

 

 

MACRO

 

 

 

 

MACRO

MACRO ON/OFF

TRANSMIT RE-NAME CLEAR LEARN MACRO

OFF ON

SYSTEM

STANDBY

A

B

PHONO

 

POWER

 

 

 

V-AUX

TUNER

MD/TAPE

CD-R

CD

 

D-TV/LD CBL/SAT

VCR 1

VCR2/DVR

DVD

Macro buttons

 

1 Set MACRO ON/OFF to ON.

2 Press a macro button.

Notes

•When you have finished using the Macro feature, set MACRO ON/OFF to OFF.

•While this unit is carrying out a macro program, this unit does not receive any other button’s function until the macro operation has been completed (the TRANSMIT indicator stops flashing).

•Continue to aim the remote control at the component the macro is operating until the macro operation has been completed.

■Programming a macro

You can program your own macros and use the Macro feature to transmit many remote control commands by pressing a single button.

Notes

•The factory-set macro is not cleared when a new macro is programmed for a button. The factory-set macro can be used again when the programmed macro is cleared.

•It is not possible to add a new signal (macro step) to the factory-set macro. Programming a macro changes all macro contents.

•A macro programming is used to transmit learning or setup (or YAMAHA preset) button signals of this remote control to a macro button. If necessary, set up the manufacturer code or program a function with the remote control for your component.

•This remote control handles button signals that operate continuously, such as volume control, as short time interval codes. Macro programming that include these types of macro steps are therefore not recommended.

1 Press MACRO by using a ballpoint pen or similar object.

“MCR ?” appears in the display window.

MACRO

2 Press a macro button for which you want to program the macro operation.

The button you chose for programming the macro operation and the selected component name appear alternately in the display window.

 

 

A

B

PHONO

V-AUX

TUNER

MD/TAPE

CD-R

CD

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

DVD

Notes

•“AGAIN” appears in the display window when a button other than the macro buttons is pressed.

•If you want to change the source component, use SOURCE SELECT k/ n. When you use the input selector buttons, selecting the input is programmed as a macro step, whereas SOURCE SELECT k/ nonly changes the component.

3 Press the buttons of the functions that you want to include in the macro operation sequence in order.

y

•You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits from the macro mode.

SYSTEM

STANDBY

A

B

PHONO

POWER

 

 

V-AUX

TUNER

MD/TAPE

CD-R

CD

D-TV/LD

CBL/SAT

VCR 1

VCR2/DVR

DVD

 

 

 

 

6CH INPUT

 

 

TITLE

 

 

 

 

 

ENTER

 

SOURCE

 

 

 

 

 

DISPLAY

MENU

 

SOUND

SELECT

SEARCH

– CHAPTER +

POWER

REC

STOP

PAUSE

PLAY 1

2 MCR 1

: DVD a

MCR 2

: DVD p

indicate the number of macro steps you entered

appear alternately so that you can set up the next step

Note

•Complete each of the following steps in 30 seconds. Otherwise, the learning mode will be automatically canceled. In this case, press MACRO again.

Note

•“NG” appears in the display window when programming has not been done correctly. In this case, start over from step 2.

48