PLAYBACK

5Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level.

VOLUME

+

or VOLUME

7Press PROGRAM l / h on the front panel repeatedly (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program.

The name of the selected sound field program appears in the front panel display.

See page 31 for details about sound field programs.

l PROGRAM h

Note

If you connected a recording component to the VCR OUT, or MD/CD-R OUT (REC) jacks, and you notice distortion or low volume during playback from other components, try turning on the recording component.

6Press TONE CONTROL on the front panel repeatedly to select “BASS” or “TREBLE” and then press BASS/TREBLE +/– to adjust the corresponding frequency response level.

TONE CONTROL

BASS/TREBLE

Front panel

or

2CH STEREO

MUSIC

ENTERTAIN

MOVIE

1

2

3

4

STANDARD

 

5CH

 

5

6

7

8

A SPEAKERS B

NIGHT

STRAIGHT

9

0

+10

ENT.

Remote control

Select “BASS” to adjust the low-frequency response.

Select “TREBLE” to adjust the high-frequency response.

Notes

Speaker and headphone adjustments are stored independently.

When “TONE BYPASS” (see page 55) is set to “AUTO”, and “BASS” and “TREBLE” are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit.

If you increase or decrease the high-frequency or low- frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

TONE CONTROL is not effective when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25).

The Roxy Thtr

Currently selected

surround field program

Notes

Choose a sound field program based on your listening preference, not merely on the name of the program.

When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25).

When sampling frequencies higher than 48 kHz are input, this unit is automatically set to the “STEREO” mode.

To display information about the currently selected input source in the front panel display, see page 28 for details.

24