■Using the test tone
Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position. This is also possible when playing sources input at the MULTI CH INPUT jacks.
1Press AMP on the remote control and then press TEST.
The unit will output a test tone.
AMP | TEST |
RETURN
MEMORY
2Press u/ drepeatedly to select a speaker to adjust.
– | ENTER | + |
|
|
PRESET/CH
•Select “TEST LEFT” to adjust the front left speaker output level.
•Select “TEST CENTER” to adjust the center speaker output level.
•Select “TEST RIGHT” to adjust the front right speaker output level.
•Select “TEST SUR.R” to adjust the surround right speaker output level.
•Select “TEST SUR.L” to adjust the surround left speaker output level.
•Select “TEST SUBWOOFER” to adjust the subwoofer output level.
3Press j/ ion the remote control to adjust the speaker output level.
PLAYBACK
Notes
•You cannot use the test tone if headphones are connected to the PHONES jack. Remove the headphones from the PHONES jack.
•This operation will override the level adjustments made in “SETUP” (see page 20).
•You cannot adjust speaker levels if “SPEAKER SET” in “SOUND MENU” (see page 53) is set to “NONE”.
•You cannot adjust the subwoofer level if “BASS” in “SPEAKER SET” (see page 53) in the set menu is set to “FRNT”.
•If you use TEST to adjust speaker levels, the speaker levels you previously adjust during playback will also change.
•If you select “SETUP” (see page 20) and then select “SET”, speaker levels change in response to any changes you make in “SETUP”.
y
Depending on the source, the speaker levels set with the test tone may not be to your liking. In this case, adjust the speaker levels while listening to the source.
OPERATION | BASIC |
|
|
– | ENTER | + |
|
|
PRESET/CH
The control range is from +10 dB to
4Press TEST on the remote control when you have completed your adjustment.
The test tone halts.
TEST
RETURN
MEMORY
English
27