PLAYBACK

Displaying information about the input

source

You can display the format, sampling frequency, channel and bit rate of the current input signal.

1Press one of the input selector buttons on the remote control to select the desired input source.

2Press AMP on the remote control and then press STRAIGHT to select “STRAIGHT”.

FORMAT

Signal format display. When this unit cannot detect a digital signal, it automatically switches to analog input.

Display status: Analog, Digital, Dolby Digital, DTS, PCM, Unknown Digital

Note

“Unknown Digital” appears when this unit detects any undecodable digital signal.

CHANNEL

Number of source channels in the input signal (front/

AMP

STRAIGHT

ENT.

surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as “3/2/LFE”.

SAMPLING

3Press u / dto display the following information about the input source.

ENTER

+

 

 

A-E/CAT.

PRESET/CH

Sampling frequency.

Display status: 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, 96kHz

BITRATE

Bit rate.

y

When you are displaying information about the input source, this unit is in the “STRAIGHT” mode (see page 33). To turn back the sound field program on, press STRAIGHT again.

28