Dynamic range 4 D.RANGE

Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.

Choices: MIN (minimum), STD (standard), MAX (maximum)

Speaker SP D.R

Adjusts the speaker compression.

Headphone HP D.R

Adjusts the headphone compression.

Select “MIN” if you regularly listen at low volume levels.

Select “STD” for general use.

Select “MAX” to preserve the greatest amount of dynamic range.

Tone bypass 5 TC.BYPASS

Use this feature to select whether audio output bypasses tone control circuitry when “BASS” and “TREBLE” are set to 0 dB (see page 24).

Choices: AUTO, OFF

Select “AUTO” if you want signals to bypass tone control circuitry to provide the purest signal possible.

Select “OFF” if you do not want signals to bypass tone control circuitry.

SET MENU

INPUT MENU

Use this menu to reassign input jacks or select the input mode.

Input assignment 1 INPUT ASSIGN

Use this feature to assign the input jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.

Once the input jacks are reassigned, you can select the corresponding component by using INPUT l/ hon the front panel (or the input selector buttons on the remote control).

For COMPONENT VIDEO jacks [A][B][C]

Choices: [A] DVD, DTV/CBL, VCR, V-AUX

[B]DVD, DTV/CBL, VCR, V-AUX

[C]DVD, DTV/CBL, VCR, V-AUX

For OPTICAL INPUT jacks 1 2

Choices: (1) DVD, DTV/CBL, CD, VCR, MD/CD-R, V-AUX

(2)DVD, DTV/CBL, CD, VCR, MD/CD-R, V-AUX

For COAXIAL INPUT jack 3

Choices: (3) DVD, DTV/CBL, CD, VCR, MD/CD-R, V-AUX

Note

You cannot select a specific item more than once for the same type of jack.

When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the signals input at the COAXIAL jack.

Input mode 2 INPUT MODE

Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 26).

Choices: AUTO, LAST

Select “AUTO” to allow this unit to automatically detect the type of input signal and select the appropriate input mode.

Select “LAST” to set this unit to automatically select the last input mode used for that source.

OPERATION

ADVANCED

 

 

English

55