Yamaha RX-V590 Adjustment of the CENTER LEVEL, To play a source with the digital sound field processor

To play a source with the digital sound field processor

3 2

1 Follow steps 1 – 6 shown in “BASIC OPERATIONS” on page 15.

2 Select the desired program that is suitable for the source.

DIGITAL SOUND FIELD PROCESSOR

	CONCERT	MONO
PRO LOGIC ENHANCED VIDEO		MOVIE STADIUM

CONCERT

HALL EFFECT

PRO LOGIC

The selected program name is shown on the display.

	<U.S.A., Canada and					<General model>
	Australia models>
	CHAPTER/CH		DISPLAY	STOP	VCR 1	REC PAUSE	DIR A PLAY	DIR B	TAPE MON
2	PRO LOGIC	ENHANCED	CONCERT	MONO	VCR 2
			VIDEO	MOVIE		TEST	STOP		LD/TV
	1	2	3	4
	SURROUND									2
	STADIUM	DISCO	ROCK	HALL	V–AUX		PRO LOGIC ENHANCED CNCT VIDEO VCR 1
	5	6	7	8
						CENTER	SUR.
		DSP		EFFECT	MASTER	LEVEL	MONO MOVIE STADIUM	DISCO	VCR 2
				ON/OFF
					VOLUME			EFFECT
							ROCK HALL	ON/OFF	V AUX
3						REAR
	CENTER LEVEL			TEST		LEVEL	DELAY TIME	VOLUME
			DELAY
			TIME
	REAR LEVEL									3
	RESET	CLEAR

3 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on this page and the next page.)

Notes

●If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect.

●When CONCERT VIDEO, MONO MOVIE, STADIUM, DISCO, ROCK CONCERT or CONCERT HALL is selected, no sound is heard from the center speaker.

●When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.

●When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

* The following adjustments can be done on the remote control transmitter as well as on the front panel.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 14.

Lights up.

CENTER LEVEL

CENTER

Adjustable

By continuously pressing “+” or “–” on theCENTER LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the preset point (80).

●If the digital sound field program CONCERT VIDEO, MONO MOVIE, STADIUM, DISCO, ROCK CONCERT or CONCERT HALL is selected, the CENTER LEVEL control cannot function.

●Once the output level is adjusted, the level value will be the same in the DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED programs.

●If a digital sound field program is not used, the CENTER LEVEL control will not function.

24