Yamaha RX-V590 Trouble shooting guide, To Clear a Learned Function, To Clear All Learned Functions

To Clear a Learned Function

1

USER

YPC LEARN

Set to the “USER” position.

2 Press and hold the CLEAR button using the point of a mechanical pencil, etc.

CLEAR

3 Press and hold the key where the learned function to be deleted is until the indicator flashes 3 times.

TRANSMIT

/LEARN

To clear two or more functions, repeat step 2 and 3.

Note

If a key is not pressed soon after the CLEAR button is pressed, this unit will automatically return to the status that was in effect before the CLEAR button was pressed.

To Clear All Learned Functions

1

USER

YPC LEARN

Set to the “LEARN” position.

2 Press and hold the CLEAR button using the point of a mechanical pencil, etc.

CLEAR

3 Press and hold any key until the indicator flashes 7 times.

TRANSMIT

/LEARN

Trouble shooting guide

SYMPTOM	CAUSE	REMEDY
The remote control transmitter does not	The batteries of this remote control	Replace the batteries with new ones and
work.	transmitter are weak.	press the RESET button on the remote
	The internal microcomputer “freezes”.	control transmitter.
Learning cannot be made successfully.	The batteries of this remote control	Replacce the batteries (and press the RESET
	transmitter and/or the other remote control	button for this remote control transmitter).
(The TRANSMIT/LEARN indicator does not
	transmitter are weak.
light up or flash.)
	The distance between the two remote control	Place the remote control transmitters with the
	transmitters is too long or too short.	proper distance.
	The signal coding or modulation of the other	Learning is not possible.
	remote control transmitter is not compatible
	with this remote control transmitter.
	Memory capacity is full.	Further learning is not possible without
		deleting unnecessary commands.
	The internal microcomputer “freezes”.	Press the RESET button on the remote
		control transmitter.

32