Yamaha RX-V590 REMOTE CONTROL “LEARNING” FUNCTION, (U.S.A., Canada and Australia models only)

REMOTE CONTROL “LEARNING” FUNCTION

(U.S.A., Canada and Australia models only)

All of the keys on this remote control transmitter can be programmed to “learn” key-functions from other remote control transmitters without losing the preset key functions. By using this feature, this unit can then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video components more convenient. Use the included user program sheets to indicate a new function learned for each key.

Note

There may occasionally be instances in which, due to the signal-coding and modulation employed by the other remote control transmitter, this unit will not be able to “learn” its signals.

➊ ➋
						➊ TRANSMIT/LEARN indicator
						➋ YPC-USER-LEARN switch
TRANSMIT		USER				YPC:	Set to this position when using preset key
	YPC						functions (for controlling this unit and/or
/LEARN		LEARN
POWER	SLEEP		TV	VCR	AUX	➌	YAMAHA components).
SKIP				DISC	PHONO		* “YPC” is the abbreviation of YAMAHA Preset
				SKIP			Code.
SEARCH			PAUSE/STOP	PLAY	CD	USER:	Set to this position when using “learned” key
DECK A/B		PRESET		A/B/C/D/E	TUNER		functions.
						LEARN:
SEARCH			STOP	PLAY	TAPE MON		Set to this position when learning new key
REC MUTE	REC/PAUSE		DIR A	DIR B			functions from other remote control transmitters.
SEARCH			PAUSE/STOP	PLAY	LD/TV	➌ Blank keys

CHAPTER/CH		DISPLAY	STOP	VCR 1
PRO LOGIC	ENHANCED	CONCERT	MONO	VCR 2
		VIDEO	MOVIE
1	2	3	4
SURROUND
STADIUM	DISCO	ROCK	HALL	V–AUX
5	6	7	8
	DSP		EFFECT	MASTER
			ON/OFF
				VOLUME
CENTER LEVEL			TEST
		DELAY
		TIME
REAR LEVEL
RESET	CLEAR

These keys have no preset functions and are used only for learning other remote control transmitter’s functions.

➍RESET button

Press this button to “reset” the internal microcomputer which controls remote control operations. Microcomputer “reset” is necessary when the remote control freezes.

*Pressing the RESET button will not erase learned functions.

➎CLEAR button

This button is used to clear one or all learned key functions. (Refer to page 32.)

➍ ➎

30