TUNING
Quick
2 3
1
AUTOMATIC TUNING | MANUAL TUNING |
Set the SELECTOR DIAL to the AMP/TUN position on the remote control and select TUNER as the input source.
1 Select the reception band (FM or AM) and confirm it on the display.
Front panel
or
2 Press TUNING MODE so that the “AUTO TUNING” indicator lights up on the display.
Front panel
Lights up
3 To tune in to a higher frequency, press the UP side of TUNING once.
To tune in to a lower frequency, press the DOWN side of TUNING once.
Front panel
*If the station where the tuning search stops is not the desired one, press once more.
*If the tuning search does not stop at the desired station (because the signal from the station is weak), take the manual tuning procedure.
1 Select the reception band (FM or AM) and confirm it on the display.
Front panel
or
2 Press TUNING MODE.
Front panel
Check that the “AUTO
TUNING” indicator goes off.
3 Tune in manually to the desired station.
Front panel
* To continue the tuning search, press and hold the button.
Notes
•If you tune in manually to an FM station, it will be automati- cally received in monaural mode to increase the signal quality.
•When tuned in to a station, the frequency of the received station is shown on the display.
30