Yamaha RX-V595A owner manual Display Panel

DISPLAY PANEL

1Multi-information display

This displays various information, for example the station frequency, preset station number and name of the selected input source.

2MEMORY indicator

When MEMORY is pressed, this indicator flashes for about five seconds. During this period, the displayed station can be stored in the memory.

3AUTO TUNING indicator

This lights up when the unit is in the automatic tuning mode.

4TAPE/MD MON indicator

This lights up when the tape deck (or MD recorder, etc.) is selected as the input source by pressing TAPE/MD MON / EXT. DECODER on the front panel or TAPE/MD on the remote control.

5STEREO indicator

This lights up when an FM stereo broadcast with sufficient signal strength is being received.

6Signal-level indicator

This indicates the signal level of the station being received.

If multipath interference is detected, the indication decreases.

7 indicators

Either “dts” indicator lights up when the built-in DTS decoder is turned on.

The red “dts” indicator lights up when playing a CD or LD encoded with DTS.

The orange “dts” indicator lights up when playing a DVD encoded with DTS.

*An orange “dts” indicator may light up when playing a CD or LD encoded with DTS after playing a video-CD or DVD on a DVD/LD combi-player.

8, and indicators

“” lights up when the built-in Dolby Digital decoder is on and the signals of the selected source encoded with Dolby

Digital are not in 2-channel. “” lights up when the built-in

digital sound field processor is on, and “” lights up when the built-in Dolby Pro Logic decoder is on. Depending on

the selected DSP program, both “” and “”, or

both “” and “” will light up.

9SLEEP indicator

This lights up while the built-in SLEEP timer is functioning.

12