Yamaha RX-V596 Display

CONTROLS AND FUNCTIONS

Display

1t indicator

The “ t” indicator lights up when the built-in DTS decoder is on.

2DSP program indicators

The name of the selected DSP program lights up in the following cases:

•When the tuner is selected as the input source.

•When DSP program No. 2, 3 or the subprogram “ENHANCED” of No. 1 is selected.

3Multi-information display

This display shows various information: for example the name of the selected DSP program and the various settings during adjustment with the SET MENU. The current station frequency and band (FM or AM) also appear when the tuner is selected as the input source.

4Input source indicators

One of the arrows for these indicators lights up depending on which source is selected.

5TAPE/MD MONITOR indicator

This lights up when the tape deck or MD recorder, etc. is selected as the input source by pressing TAPE/MD MON / EXT. DECODER (or TAPE/MD).

6 g and o indicators

“ g ” lights up when the built-in Dolby Digital decoder is on. “ o ” lights up when the built-in Dolby Pro Logic decoder is on.

7 x indicator

“ x ” lights up when the built-in digital sound field processor is on.

8MEMORY indicator

This flashes for about five seconds after pressing MEMORY. During this period, the displayed station can be stored in the memory.

9AUTO indicator

This lights up when the unit is in the automatic tuning mode.

0STEREO indicator

This lights up when an FM stereo broadcast with sufficient signal strength is being received.

qSignal-level indicator

This indicates the signal level of the station being received. If multipath interference is detected, the indication decreases.

wSLEEP indicator

This lights up while the built-in SLEEP timer is on.

6

Contents

Page SAFETY INSTRUCTIONS FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FEATURESCONTENTS GETTING STARTED Checking the Package Contents Control Battery Replacement Using the Remote Control CONTROLS AND FUNCTIONS Front Panel Page Display Remote Control Description of the Numeric Buttons ■When selecting an input source ■When selecting a preset station number SPEAKER SETUP Speakers to Be Used Speaker Placement CONNECTIONS Before Connecting Components Connecting the Antennas ■AM loop antenna (included) ■Connecting the AM loop antenna ■Outdoor AM antenna ■Ground (GND terminal) Connecting an Audio Component Connecting a Video Component ■VIDEO terminals (composite) ■VIDEO AUX terminals (on the front panel) Connecting to an External Decoder Connecting the Speakers ■Speaker cables ■Connecting to the MAIN SPEAKERS terminals ■Connecting to the REAR and CENTER SPEAKERS terminals ■Connecting to an external amplifier IMPEDANCE SELECTOR Switch Connecting the Power Supply Cords ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■BGV (background video) function ■AUTO ■DTS ■ANALOG ■Switching the input mode ■Notes on playing a source encoded with DTS ■Notes on playing an LD source ■Notes on the digital signal DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT Selecting a DSP Program Canceling the Sound Effect (turning off the effect speakers) TUNING Automatic Tuning Manual Tuning Automatic Preset Tuning (for FM stations only) Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE SOUND FIELD PROGRAM Page ■For Hi-Fiaudio sources CINEMA DSP: Dolby Surround + DSP/Dolby Digital + DSP/DTS + DSP ■Dolby Pro Logic + 2 digital sound fields ■Dolby Digital or DTS + 3 digital sound fields SET MENU Description of Each Item 5. MAIN LVL 6.D.D. LFE (Adjusting the output level of the LFE channel for Dolby Digital) 7.D-RANGE(Adjusting the dynamic range) 8.DTS LFE (Adjusting the output level of the LFE channel for DTS) 9.CNTR DELAY (Adjusting the delay of the sound from the center speaker) 10.MEM. GUARD (Locking the settings) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the Selected SLEEP Timer PRESET REMOTE CONTROL Selector Dial Commonly used buttons in any position of the selector dial Controlling the Components Connected to This Unit Description of Each Position ■CD position ■DVD/LD position ■DVD MENU position ■VCR position ■CBL/SAT position ■TV position Advanced Information ■Returning to the factory-setcodes TROUBLESHOOTING Page ■ Tuner ■Remote control ■ Others ■When playing back a source encoded with DTS SPECIFICATIONS GLOSSARY INDEX LIST OF MANUFACTURER’S CODES LISTES DES CODES FABRICANT