Manual Preset Tuning

You can also store up to 40 stations (5 groups x 8 stations) manually.

–

+

–

+

3 4 2,5

1Tune in to the desired station.

Refer to page 27 for the tuning procedure.

2Press MEMORY.

The “MEMORY” indicator flashes for about five seconds.

Flashes

3Press A/B/C/D/E repeatedly to select the desired group (A to E) of preset stations before the “MEMORY” indicator goes off.

Make sure that “ z ” appears on the display. The selected group appears on the display.

4Press PRESET/TUNING h or l to select a preset station number (1 to 8) with which you want to store the station before the “MEMORY” indicator goes off.

Press h to select a higher preset station number and l to select a lower preset station number.

5Press MEMORY before the “MEMORY” indicator goes off.

The displayed station has been stored as the preset group and number you have selected, and the reception band and frequency appear on the display.

6Repeat steps 1 to 5 to store other stations.

Notes

•A new setting can be stored in place of the former one.

•The reception mode (stereo or monaural) is stored along with the station frequency.

TUNING

To Recall a Preset Station

You can recall any desired station simply by selecting the preset station number with which it was stored.

You can also recall a preset station with the remote control. Set the selector dial to the AMP/TUN position and press TUNER (number 2) to select the tuner as the input source.

–

+

–

+

1 2

 

1

BASIC

 

 

 

2

OPERATION

1 Press A/B/C/D/E to select the required group

 

of preset stations.

 

Make sure that “ z ” appears on the display.

 

 

or

 

Front panel

Remote control

 

2Press PRESET/TUNING h or l (or PRESET +/–) to select a preset station number (1 to 8).

The preset group and number appear on the display along with the reception band, frequency and signal strength information.

or

Front panel

 

Remote control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

y

in the AMP/TUN (or DSP/TUN) position.

English

You can select the preset station number with the numeric buttons

 

(1 to 8) on the remote control if code number “0023” has been set

29